Toyota hub nut socket

skid · Post by **skid** » Sat Sep 17, 2011 7:58 pm

righto, went to do my wheel bearings today and went looking for the 54mm socket to do the job once I had it apart

super chump and ripco looked at me funny, toyota had a blank stare as well

so where the faaark do you guys buy these from :?:

meatc · Post by **meatc** » Sat Sep 17, 2011 7:59 pm

Jafa used to do them at SNR not sure if he still is

kbushnz · Post by **kbushnz** » Sat Sep 17, 2011 8:08 pm

I got mine from my local tool shop, Waitemata Hydraulics from memory, (Westie)
I have seen pressed steel ones. Might have been for doing the heater elements for hot water cylinders.
Or as said SNR.
http://www.snr4x4.co.nz/54mm-spindle-socket-p-206.html
or
http://www.bearingandengineering.co.nz/ ... +TONY.html

suzolla · Post by **suzolla** » Sat Sep 17, 2011 9:58 pm

I have got some comming from Trailgear but wont be here until first week in Oct.
Cheers
Tim

hosehustler · Post by **hosehustler** » Sat Sep 17, 2011 10:07 pm

I always found a brass drift was adequate.....got a 54mm socket from Jafa a few years back tho was superb :mrgreen:

lent it to someone...Dad i think, but can't remember

....back to the brass drift now

nstacey · Post by **nstacey** » Sat Sep 17, 2011 10:34 pm

I've got one you can borrow Skid

mudlva · Post by **mudlva** » Sat Sep 17, 2011 11:30 pm

I think i got my one from busntruck in manukau
Called don kytts now
Worth giving them a call

Swamped · Post by **Swamped** » Sat Sep 17, 2011 11:34 pm

You can get that sorta thing off sulco. Mate just got a 58mm i think, off them. Maybe even tradezone can source you one.

tallsam66 · Post by **tallsam66** » Sun Sep 18, 2011 2:14 am

The SNR ones are good as they are made to suit a 3/8 rathet...if you buy a normal socket it will be 3/4 & almost nobody has that size ratchet or bar.

niblik · Post by **niblik** » Sun Sep 18, 2011 5:36 am

i got mine, which takes a 1/2", off trade me a couple of years back from a trader of 40 and rover parts in dunnos... sorry but cant remember his username..

ClassicCruiserSpares · Sun Sep 18, 2011 5:42 am

niblik wrote:i got mine, which takes a 1/2", off trade me a couple of years back from a trader of 40 and rover parts in dunnos... sorry but cant remember his username..

Thats BJ Autos in dunedin or BJ305 is his trademe name.

rayndeb · Post by **rayndeb** » Sun Sep 18, 2011 8:39 am

Lineside in rangiora $35

Pedro · Post by **Pedro** » Sun Sep 18, 2011 8:55 am

skid wrote:righto, went to do my wheel bearings today and went looking for the 54mm socket to do the job once I had it apart

super chump and ripco looked at me funny, toyota had a blank stare as well

so where the faaark do you guys buy these from

um skiddy, i used to makem..........

:lol:

Pedro

UBZ · Post by **UBZ** » Sun Sep 18, 2011 10:11 am

ClassicCruiserSpares wrote:
niblik wrote:i got mine, which takes a 1/2", off trade me a couple of years back from a trader of 40 and rover parts in dunnos... sorry but cant remember his username..

Thats BJ Autos in dunedin or BJ305 is his trademe name.

yep that the place I got mine as well.

skid · Post by **skid** » Sun Sep 18, 2011 10:19 am

Pedro wrote:
skid wrote:righto, went to do my wheel bearings today and went looking for the 54mm socket to do the job once I had it apart

super chump and ripco looked at me funny, toyota had a blank stare as well

so where the faaark do you guys buy these from

um skiddy, i used to makem..........

Pedro

oh that could take a while then, havent seen a winch cradle for a while :lol:

skid · Post by **skid** » Sun Sep 18, 2011 10:39 am

thanks for the replies guys, have just ordered some from SNR

chur chur :wink:

Pedro · Post by **Pedro** » Sun Sep 18, 2011 10:44 am

skid wrote:
Pedro wrote:
skid wrote:righto, went to do my wheel bearings today and went looking for the 54mm socket to do the job once I had it apart

super chump and ripco looked at me funny, toyota had a blank stare as well

so where the faaark do you guys buy these from

um skiddy, i used to makem..........

Pedro

oh that could take a while then, havent seen a winch cradle for a while

possibly cause i aint seen the truck for a while either......
hard to fit when it not here :roll:

pedro

Toyota hub nut socket

Toyota hub nut socket

Re: Toyota hub nut socket

Re: Toyota hub nut socket

Re: Toyota hub nut socket

Re: Toyota hub nut socket

Re: Toyota hub nut socket

Re: Toyota hub nut socket

Re: Toyota hub nut socket

Re: Toyota hub nut socket

Re: Toyota hub nut socket

Re: Toyota hub nut socket

Re: Toyota hub nut socket

Re: Toyota hub nut socket

Re: Toyota hub nut socket

Re: Toyota hub nut socket

Re: Toyota hub nut socket

Re: Toyota hub nut socket