LOL Another Project or THREE
Re: LOL Another Project or THREE
Osilating ?? got any pics
Re: LOL Another Project or THREE
Damm start time for the CHCH port has been moved up I'm now flying out in an hr.... still got to make a bracket for the new Alternator and make the water lines to the rear, bastard looks like the truck isn't going to make Gwavas
Re: LOL Another Project or THREE
I'm back in the shed 
here's an update
Steering box mounted


The flat pitman arm make this so much easier... you can see in the second shot there is nice clearance between tie-rod and drag link and I've managed to fit the original steering column
all that needs doing to finish it off is the cooling lines.... since I've got time I'm going to sort things out properly (not make fit
)
starting with the back end I ran some pipes up through the deck then decided to use them to make a bit of guard for the fans

had a heap of short bits of 19mm plumbing pipe and a couple of old tie-rods so
I'm now trying to mount the header tank wingnut got me

from where I'm sitting, I'm certain it was the cheapest thing he could find.... took me ages to work out how to mount it, here's a shot showing the factory mounting

a 6mm rod will fit into the hole and there is a spring tab next to it..... this one had me scratching my head for a bit but think I've got it sorted
should have pic's tonight with a creative answer
cheers Reece

here's an update
Steering box mounted


The flat pitman arm make this so much easier... you can see in the second shot there is nice clearance between tie-rod and drag link and I've managed to fit the original steering column
all that needs doing to finish it off is the cooling lines.... since I've got time I'm going to sort things out properly (not make fit

starting with the back end I ran some pipes up through the deck then decided to use them to make a bit of guard for the fans


had a heap of short bits of 19mm plumbing pipe and a couple of old tie-rods so

I'm now trying to mount the header tank wingnut got me


from where I'm sitting, I'm certain it was the cheapest thing he could find.... took me ages to work out how to mount it, here's a shot showing the factory mounting


a 6mm rod will fit into the hole and there is a spring tab next to it..... this one had me scratching my head for a bit but think I've got it sorted

should have pic's tonight with a creative answer
cheers Reece
Re: LOL Another Project or THREE
Hi Reece, what you doing at CHCH PORT ????, thats where I work,oops I mean go to get paid
,
FITZY.



FITZY.
Re: LOL Another Project or THREE
Load log boats.... I'm one of the digger drivers that are inside the boat, keep meaning to try and catch up with some of you local guys while I'm down but they keep giving night shift 

Re: LOL Another Project or THREE
Sorted the water bottle, added a bit of protection since its sitting up a bit exposed


- MNC
- Hard Yaka
- Posts: 2100
- Joined: Sun Apr 02, 2006 12:00 pm
- Location: Close to (wishing I was closer to) the Puhoi Pub!
Re: LOL Another Project or THREE
De-Ranged wrote:
D R - De-Ranged bar work
That is some cool sh!t right there!!!! Nice

