Cruiser 2f engine wanted

tgaguy1 · Post by **tgaguy1** » Mon Sep 11, 2006 12:03 pm

I need a toyota 2f engine (4.2 petrol) for a fj40. For a bush truck so any runner considered. May consider complete 3f.
Contact me by PM or email jasonmyhill@hotmail.com

muddy · Post by **muddy** » Mon Sep 11, 2006 12:45 pm

I have a 2F kindly donated by rowinz which I'm rebuilding to replace mine - which runs OK, but is a heavy oil-burner. Probably just valves, but I won't know till I pull the head - & I won't do that till the donor is ready. If you can wait a couple of months, you can have the old one - but shipping to the NI would be a killer if you have to pay for it...

tgaguy1 · Post by **tgaguy1** » Mon Sep 11, 2006 2:23 pm

Thanks. Sounds good. I can wait a couple of months. I will see what I can arrange for freight while i'm waiting. Keep me posted.

Sadam_Husain · Post by **Sadam_Husain** » Mon Sep 11, 2006 10:09 pm

Gave a good 3F away a couple of months ago
Bad timing :oops:

tgaguy1 · Post by **tgaguy1** » Tue Sep 12, 2006 8:44 am

Bugger. A 3f would have gone well. Anyone else want to give one away?

wopass · Post by **wopass** » Tue Sep 12, 2006 5:20 pm

im waiting for a

Engine Code/Name 1FZ-FE

Engine capacity (cc) 4477

Engine type Petrol

Engine description 6cyl/DOHC/4v

Max Power 165kW @ 4600rpm

Max Torque 387Nm @ 3600rpm

Number of cylinders 6cyl

Configuration In-line

Valvetrain DOHC

Valves per cylinder 4v

to come up in my price range to bolt into my missile

.... might be waiting a while :roll:

Conan · Post by **Conan** » Tue Sep 12, 2006 7:12 pm

i know of a 14b coming up

tgaguy1 · Post by **tgaguy1** » Sat Sep 16, 2006 8:55 am

I want to stay with petrol thanks.
Wopass does the 4.5 litre bolt straight in or are you going to make adaptors?

tgaguy1 · Post by **tgaguy1** » Thu Oct 19, 2006 2:49 pm

Well stop looking. I bought a 283 Chev last night ready to bolt straight in

. I think this is going to be alot of fun when it is finished :twisted:

. I had better get some before photos so I can post them on here.

doddzee · Post by **doddzee** » Thu Oct 19, 2006 3:01 pm

wopass wrote:8) im waiting for a

Engine Code/Name 1FZ-FE

Engine capacity (cc) 4477

Engine type Petrol

Engine description 6cyl/DOHC/4v

Max Power 165kW @ 4600rpm

Max Torque 387Nm @ 3600rpm

Number of cylinders 6cyl

Configuration In-line

Valvetrain DOHC

Valves per cylinder 4v

to come up in my price range to bolt into my missile .... might be waiting a while

My dad has two 80 series one with that petrol motor and the other with the 24 valve diesel in it. The diesel has a heap more power and hauls up the hills, the petrol is thirsty and gutless. I think you would be better off putting a 350 Chev in it. :twisted:

Cruiser 2f engine wanted

Cruiser 2f engine wanted

;-p

Re: ;-p