Anyone have a winch near kumeu?

Garage talk. Anything from mounting a winch to water proofing the electrics.
User avatar
Filthy4x4
Hard Yaka
Posts: 1052
Joined: Mon Dec 20, 2010 2:51 pm
Location: KKK

Anyone have a winch near kumeu?

Post by Filthy4x4 »

Hey guys,

After heading out to my mates farm yesterday I went up one of the usual hillclimbs we do there and got almost to the top and after hitting a bump my truck stalled and wont start now.

We checked the fuel and it doesnt need to be bled but we cracked the injectors anyway and it still wouldnt start so we tried to tow it up the hill and get it onto flat ground to get a better look at it but we couldnt quite get it up far enough.

So is there anyone that can come out and give me a small winch or even a tow would work fine (if you have decent tyres). Can maybe have a play around the farm as a reward (its a small farm 20 acres or so but there is a few hillclimbs etc) or box of beers or whatever.

Would be great if you had a decent idea about diesels too :lol: :lol:

Cheers

Caleb
0211253921
Image
027 MUD GEAR - (027 683 4327)

Check our facebook:
http://www.facebook.com/Filthy4x4

http://www.facebook.com/Filthymotorsportnz
User avatar
kbushnz
Hard Yaka
Posts: 2486
Joined: Wed Sep 16, 2009 9:03 am
Location: Massey, Auckland

Re: Anyone have a winch near kumeu?

Post by kbushnz »

Can help PM and TxT sent
Calvin
Cheers Calvin
KZJ78 Landcruiser Prado...
User avatar
Filthy4x4
Hard Yaka
Posts: 1052
Joined: Mon Dec 20, 2010 2:51 pm
Location: KKK

Re: Anyone have a winch near kumeu?

Post by Filthy4x4 »

Cheers, You have a reply :wink:
Image
027 MUD GEAR - (027 683 4327)

Check our facebook:
http://www.facebook.com/Filthy4x4

http://www.facebook.com/Filthymotorsportnz
User avatar
kbushnz
Hard Yaka
Posts: 2486
Joined: Wed Sep 16, 2009 9:03 am
Location: Massey, Auckland

Re: Anyone have a winch near kumeu?

Post by kbushnz »

Pulled the Surf upto the road...
Some fuses found blown as a result of a loose battery bouncing around. (something for Caleb to fix :D )
Tried to jump start but jumper leads too light....just got hot... :shock:
So Caleb has a battery to charge and hopefully all will be good!!
Nice distraction and a Sunday drive. :mrgreen:

Cheers Calvin
Cheers Calvin
KZJ78 Landcruiser Prado...
User avatar
Sadam_Husain
Angry bird
Posts: 5164
Joined: Mon Feb 20, 2006 12:00 pm
Location: WELLINGTON

Re: Anyone have a winch near kumeu?

Post by Sadam_Husain »

Oh yeah I remember the electrical thread..... still a bit more to get sorted out aye :mrgreen: :mrgreen: :mrgreen:


http://www.offroadexpress.co.nz/Forums/ ... 22&t=27556
User avatar
Filthy4x4
Hard Yaka
Posts: 1052
Joined: Mon Dec 20, 2010 2:51 pm
Location: KKK

Re: Anyone have a winch near kumeu?

Post by Filthy4x4 »

Thanks again Calvin, just about to run out the door and have another go at sorting it out.

Your not wrong there Sadam :lol: :lol: I have neglected it for so long (didnt have a job for ages) so its all falling apart at the seams at the mo, im slowly getting there as much as my wallet allows :lol: :lol:

I will get there eventually, meantime i'm learning heaps and im still happy with it....but I can feel the itch for a solid axle and plenty of flex so may be time to start hiding my pennies away :mrgreen:

Caleb
Image
027 MUD GEAR - (027 683 4327)

Check our facebook:
http://www.facebook.com/Filthy4x4

http://www.facebook.com/Filthymotorsportnz
SP450andLE
Hard Yaka
Posts: 992
Joined: Fri Sep 24, 2010 10:38 am
Location: Beach Haven and kaiwaka

Re: Anyone have a winch near kumeu?

Post by SP450andLE »

*Cough If you want more flex get a Lada Cough* :lol:

Nah bro, keep working at your Surf and It'll soon be a beast :D
tomsoffroad wrote:None of us know what we are doing really. But thats how you get experience.
User avatar
Big-AL
Hard Yaka
Posts: 549
Joined: Tue Oct 24, 2006 12:00 pm
Location: Hibiscus Coast, Auckland

Re: Anyone have a winch near kumeu?

Post by Big-AL »

photos?
User avatar
kbushnz
Hard Yaka
Posts: 2486
Joined: Wed Sep 16, 2009 9:03 am
Location: Massey, Auckland

Re: Anyone have a winch near kumeu?

Post by kbushnz »

I didn't take any, wasn't a :oops: style recovery.
Just a little drag up a hill onto the flat.
So it was parked up in a better position to work on and wouldn't roll away.
But I did take the camera in case it was :mrgreen:

Calvin
Cheers Calvin
KZJ78 Landcruiser Prado...
User avatar
Sadam_Husain
Angry bird
Posts: 5164
Joined: Mon Feb 20, 2006 12:00 pm
Location: WELLINGTON

Re: Anyone have a winch near kumeu?

Post by Sadam_Husain »

You boys get all the standard paperwork and documentation sorted out so theres no arguements afterwards :mrgreen: :mrgreen:






Image
User avatar
sibainmud
Hard Yaka
Posts: 1846
Joined: Sun Apr 04, 2010 9:27 am
Location: North Shore Auckland

Re: Anyone have a winch near kumeu?

Post by sibainmud »

Sadam_Husain wrote:Oh yeah I remember the electrical thread..... still a bit more to get sorted out aye :mrgreen: :mrgreen: :mrgreen:


http://www.offroadexpress.co.nz/Forums/ ... 22&t=27556


Hmmmm
I'm slowly refining the lads repair antics :lol: :lol:
Truth be known, I would of been the one dragging that Surfs sorry arse up yet another hill if i hadn't used all my 4wd "leave pass" up last weekend and spotted his post early enough.
It's almost time to start thinking about a cheap shitta to run around in and do the Toyota up properly :D
Cheers,
I keep looking for the loose nut behind the wheel, but I can't find it!!
User avatar
Sadam_Husain
Angry bird
Posts: 5164
Joined: Mon Feb 20, 2006 12:00 pm
Location: WELLINGTON

Re: Anyone have a winch near kumeu?

Post by Sadam_Husain »

sibainmud wrote:Hmmmm
I'm slowly refining the lads repair antics :lol: :lol:
Truth be known, I would of been the one dragging that Surfs sorry arse up yet another hill if i hadn't used all my 4wd "leave pass" up last weekend and spotted his post early enough.
It's almost time to start thinking about a cheap shitta to run around in and do the Toyota up properly :D
Cheers,



yeah mate he might not have made very good repair progress in the first attempt(s) but at least hes keen to give it a go and and try to fix it :mrgreen:
User avatar
Lynx
Hard Yaka
Posts: 600
Joined: Tue Jan 20, 2009 9:55 pm

Re: Anyone have a winch near kumeu?

Post by Lynx »

sibainmud wrote:
Sadam_Husain wrote:Oh yeah I remember the electrical thread..... still a bit more to get sorted out aye :mrgreen: :mrgreen: :mrgreen:


http://www.offroadexpress.co.nz/Forums/ ... 22&t=27556



It's almost time to start thinking about a cheap shitta to run around in and do the Toyota up properly :D
Cheers,


yeah you could get a terrano as a cheap shitta to drive around in while you fix your surf. :mrgreen:
User avatar
sibainmud
Hard Yaka
Posts: 1846
Joined: Sun Apr 04, 2010 9:27 am
Location: North Shore Auckland

Re: Anyone have a winch near kumeu?

Post by sibainmud »

Lynx wrote:
sibainmud wrote:
Sadam_Husain wrote:Oh yeah I remember the electrical thread..... still a bit more to get sorted out aye :mrgreen: :mrgreen: :mrgreen:


http://www.offroadexpress.co.nz/Forums/ ... 22&t=27556



It's almost time to start thinking about a cheap shitta to run around in and do the Toyota up properly :D
Cheers,


yeah you could get a terrano as a cheap shitta to drive around in while you fix your surf. :mrgreen:


Gold :!:
I keep looking for the loose nut behind the wheel, but I can't find it!!
User avatar
Filthy4x4
Hard Yaka
Posts: 1052
Joined: Mon Dec 20, 2010 2:51 pm
Location: KKK

Re: Anyone have a winch near kumeu?

Post by Filthy4x4 »

sibainmud wrote:
Sadam_Husain wrote:Oh yeah I remember the electrical thread..... still a bit more to get sorted out aye :mrgreen: :mrgreen: :mrgreen:


http://www.offroadexpress.co.nz/Forums/ ... 22&t=27556


Hmmmm
I'm slowly refining the lads repair antics :lol: :lol:
Truth be known, I would of been the one dragging that Surfs sorry arse up yet another hill if i hadn't used all my 4wd "leave pass" up last weekend and spotted his post early enough.
It's almost time to start thinking about a cheap shitta to run around in and do the Toyota up properly :D
Cheers,


What was wrong with my repair jobs before :lol: :lol: :mrgreen: All jokes aside your help and input has been huge and it is greatly appreciated, I now try and fix things to the best of my knowledge and abilities (never thought that would happen :lol: ).

Yea im trying to do something about a daily heap but am struggling to keep my head above the water at the mo so any spare money gets swallowed fairly instantly.

Ill get there eventually, just got to keep on keeping on.

Caleb
Image
027 MUD GEAR - (027 683 4327)

Check our facebook:
http://www.facebook.com/Filthy4x4

http://www.facebook.com/Filthymotorsportnz
User avatar
Filthy4x4
Hard Yaka
Posts: 1052
Joined: Mon Dec 20, 2010 2:51 pm
Location: KKK

Re: Anyone have a winch near kumeu?

Post by Filthy4x4 »

Anyway a bit of an update on said lemon.

I went back today and chucked a fresh batt into it but it just did the same thing, turned over with no sign of wanting to fire.

So I cracked the injectors again and theres still no fuel coming out.

Im really hoping my diesel pump hasnt shit itself :roll: I dont know anything about the pumps but I thought it may have given some kind of warning before dying rather than just switching off and not wanting to work again.

So once again im at a loss for ideas on what the problem could be.

Iv got my mates 4wd to borrow to get to work in til the weekend so im not in a huge rush but would like to at least identify some causes.

So if you have any ideas feel free to express yourself :wink:

Cheers

Caleb
Image
027 MUD GEAR - (027 683 4327)

Check our facebook:
http://www.facebook.com/Filthy4x4

http://www.facebook.com/Filthymotorsportnz
User avatar
kbushnz
Hard Yaka
Posts: 2486
Joined: Wed Sep 16, 2009 9:03 am
Location: Massey, Auckland

Re: Anyone have a winch near kumeu?

Post by kbushnz »

As you said the battery went west and jumped about under the bonnet and we found some blown fuses, I would check to see if you have power to the fuel cut off solenoid.
Could be a fuse-able link which has gone.
Or a pulled wire.
If no power you can run a wire straight from the battery to it, and crank her over again but to turn off motor you will need to pull the wire off.

I cant see bouncing around doing any damage mechanically.

Calvin
Cheers Calvin
KZJ78 Landcruiser Prado...
User avatar
Filthy4x4
Hard Yaka
Posts: 1052
Joined: Mon Dec 20, 2010 2:51 pm
Location: KKK

Re: Anyone have a winch near kumeu?

Post by Filthy4x4 »

I did have a look around to make sure everything was plugged in, but didnt have anything on me to test it. Might take the volt meter up with me next time and some spare wire.

Do I just start turning the engine over then place the test wire onto the + or do I connect it to + first then try turn over?

Cheers
Image
027 MUD GEAR - (027 683 4327)

Check our facebook:
http://www.facebook.com/Filthy4x4

http://www.facebook.com/Filthymotorsportnz
User avatar
sibainmud
Hard Yaka
Posts: 1846
Joined: Sun Apr 04, 2010 9:27 am
Location: North Shore Auckland

Re: Anyone have a winch near kumeu?

Post by sibainmud »

Bang on Calvin. Saved me typing it out :lol:
Hotwire and test light would help lots.
I'm available after work tomorrow if that helps.
Cheers,
I keep looking for the loose nut behind the wheel, but I can't find it!!
User avatar
Filthy4x4
Hard Yaka
Posts: 1052
Joined: Mon Dec 20, 2010 2:51 pm
Location: KKK

Re: Anyone have a winch near kumeu?

Post by Filthy4x4 »

Hey dude,

Cheers for the offer :D Ill try to sort it out myself this time, will save you the hassle of getting your hands dirty on a filthy smurf again :lol:

Would I be able to do it with a volt meter? Or should I make up a test light?

Would roll starting it bypass the fuel cut off solenoid? Im guessing no as its gonna be a one way shut off solenoid that needs the correct power supply to open?

Ill give this one my best shot if all else fails then I may have to save up for another bottle of aftermarket water :wink: :mrgreen:

Cheers
Image
027 MUD GEAR - (027 683 4327)

Check our facebook:
http://www.facebook.com/Filthy4x4

http://www.facebook.com/Filthymotorsportnz
User avatar
pressy
Hard Yaka
Posts: 445
Joined: Mon Aug 16, 2004 12:00 pm
Location: christchurch

Re: Anyone have a winch near kumeu?

Post by pressy »

hi do you have fuel at the bleed valve on the diesel filter?
User avatar
Lynx
Hard Yaka
Posts: 600
Joined: Tue Jan 20, 2009 9:55 pm

Re: Anyone have a winch near kumeu?

Post by Lynx »

uwshho wrote:Hey dude,

Cheers for the offer :D Ill try to sort it out myself this time, will save you the hassle of getting your hands dirty on a filthy smurf again :lol:

Would I be able to do it with a volt meter? Or should I make up a test light? Volt meter will be fine

Would roll starting it bypass the fuel cut off solenoid? Im guessing no as its gonna be a one way shut off solenoid that needs the correct power supply to open? no, it still needs power

Ill give this one my best shot if all else fails then I may have to save up for another bottle of aftermarket water :wink: :mrgreen:

Cheers
User avatar
Filthy4x4
Hard Yaka
Posts: 1052
Joined: Mon Dec 20, 2010 2:51 pm
Location: KKK

Re: Anyone have a winch near kumeu?

Post by Filthy4x4 »

So I went out and had a play with the truck this arvo.

Got it running with a hotwire, so need to replace whatevers broken.

Will go to bnt tomorrow, do I ask for a fusible link or will it be a popped fuse somewhere?

Cheers

Caleb
Image
027 MUD GEAR - (027 683 4327)

Check our facebook:
http://www.facebook.com/Filthy4x4

http://www.facebook.com/Filthymotorsportnz
User avatar
MNC
Hard Yaka
Posts: 2100
Joined: Sun Apr 02, 2006 12:00 pm
Location: Close to (wishing I was closer to) the Puhoi Pub!

Re: Anyone have a winch near kumeu?

Post by MNC »

Hey Caleb,

Sorry for the thread jack... Are any of the Nor West guys coming on the Rodney Club Ahuroua Safari in 2 weeks?

I'm keen to meet a few of your club guys and join up as a casual member if you'll have me?

Now that truck is running I want to get out on a few runs. That Pig Farm trip you did looked like a laugh 8)
Image
User avatar
kbushnz
Hard Yaka
Posts: 2486
Joined: Wed Sep 16, 2009 9:03 am
Location: Massey, Auckland

Re: Anyone have a winch near kumeu?

Post by kbushnz »

uwshho wrote:So I went out and had a play with the truck this arvo.

Got it running with a hotwire, so need to replace whatevers broken.

Will go to bnt tomorrow, do I ask for a fusible link or will it be a popped fuse somewhere?

Cheers

Caleb


Good news Caleb..(Just what I thought)
I don't think you can buy fuse-able links over the counter....
I would start checking your wires from the battery.
Then all your fuses, and any relays which might switch the solenoid on / off.
Might be time to find a manual with a wiring diagram.
I am sure there will be something on the net...

Calvin
Cheers Calvin
KZJ78 Landcruiser Prado...
User avatar
Filthy4x4
Hard Yaka
Posts: 1052
Joined: Mon Dec 20, 2010 2:51 pm
Location: KKK

Re: Anyone have a winch near kumeu?

Post by Filthy4x4 »

Hey dude,

No worries, thread is nearing an end anyway :lol:

Cant remember off the top of my head who put there hands up for the safari, I think there was a couple of people keen.

Anyone is more than welcome to come along to club meetings, the next one is on the 14th at paddys bar in kumeu at 7:30pm.

Caleb
Image
027 MUD GEAR - (027 683 4327)

Check our facebook:
http://www.facebook.com/Filthy4x4

http://www.facebook.com/Filthymotorsportnz
User avatar
Filthy4x4
Hard Yaka
Posts: 1052
Joined: Mon Dec 20, 2010 2:51 pm
Location: KKK

Re: Anyone have a winch near kumeu?

Post by Filthy4x4 »

kbushnz wrote:
uwshho wrote:So I went out and had a play with the truck this arvo.

Got it running with a hotwire, so need to replace whatevers broken.

Will go to bnt tomorrow, do I ask for a fusible link or will it be a popped fuse somewhere?

Cheers

Caleb


Good news Caleb..(Just what I thought)
I don't think you can buy fuse-able links over the counter....
I would start checking your wires from the battery.
Then all your fuses, and any relays which might switch the solenoid on / off.
Might be time to find a manual with a wiring diagram.
I am sure there will be something on the net...

Calvin


One day ill have the knowledge to be able to help people, I cant wait :mrgreen:
Bummer, Ill have to go out and check it over tomorrow and fix it friday I think.
Wiring diagram is a good idea, except I think alot of it has been butchered by the old owner, but I shall give it a shot and see where I get too.
At least its fixable :mrgreen:

Caleb
Image
027 MUD GEAR - (027 683 4327)

Check our facebook:
http://www.facebook.com/Filthy4x4

http://www.facebook.com/Filthymotorsportnz
User avatar
muddyhilux
Hard Yaka
Posts: 1307
Joined: Wed Oct 04, 2006 12:00 pm
Location: auckland

Re: Anyone have a winch near kumeu?

Post by muddyhilux »

may i sugest running a wire from bat threw a fuse to inside cab threw a hidden switch then to pump,cheap form of imobilisation id say??
1990 surf 350 chevy jacked up and currently under construction again
User avatar
MNC
Hard Yaka
Posts: 2100
Joined: Sun Apr 02, 2006 12:00 pm
Location: Close to (wishing I was closer to) the Puhoi Pub!

Re: Anyone have a winch near kumeu?

Post by MNC »

uwshho wrote:Hey dude,

No worries, thread is nearing an end anyway :lol:

Cant remember off the top of my head who put there hands up for the safari, I think there was a couple of people keen.

Anyone is more than welcome to come along to club meetings, the next one is on the 14th at paddys bar in kumeu at 7:30pm.

Caleb


Sweet, any idea of who or what trucks? So I can introduce myself.
Image
User avatar
sibainmud
Hard Yaka
Posts: 1846
Joined: Sun Apr 04, 2010 9:27 am
Location: North Shore Auckland

Re: Anyone have a winch near kumeu?

Post by sibainmud »

MNC wrote:
uwshho wrote:Hey dude,

No worries, thread is nearing an end anyway :lol:

Cant remember off the top of my head who put there hands up for the safari, I think there was a couple of people keen.

Anyone is more than welcome to come along to club meetings, the next one is on the 14th at paddys bar in kumeu at 7:30pm.

Caleb


Sweet, any idea of who or what trucks? So I can introduce myself.


PM sent 8)
Cheers,
I keep looking for the loose nut behind the wheel, but I can't find it!!
Post Reply

Return to “Tool Shed”