another terrano/safari project = terrari

kiwipete · Post by **kiwipete** » Sun Sep 25, 2011 6:02 pm

What type of bonnet scoop are you planning on using Pete?

passengerpete · Post by **passengerpete** » Sun Sep 25, 2011 10:02 pm

kiwipete wrote:What type of bonnet scoop are you planning on using Pete?

i wont need one as its water to air so will have a radiator at front then pumped to inter cooler

kiwipete · Post by **kiwipete** » Mon Sep 26, 2011 5:25 am

passengerpete wrote:
kiwipete wrote:What type of bonnet scoop are you planning on using Pete?

i wont need one as its water to air so will have a radiator at front then pumped to inter cooler

Oops

passengerpete · Post by **passengerpete** » Sun Oct 16, 2011 7:44 am

been busy at work so things put on hold. a small up date the intercooler is mostly done but have no steel to make mounts to finish it. and nothing is open on a weekend that i know of. so i guess i have to buy 8m of steel just to cut 300mm of it lol.will sort that out this week also the water pump for the heat exchanger is not working so playing with at mo.have put it back to std until i get it all sorted.
have ordered some 3'' lift spring wont put em in just yet as will have a massive rake on it until front is sorted.
went for a wof and passed yay but he said that the drag-link is starting a bit sloppy so was trying to find the ball joints to fit it. but no one listed em... i guess it must be sold as a complete unit ?
wile i was under it i had a look around and found bent tie rods i did lol as this trucks runs on 30'' tyres and not been off road in my possession.

passengerpete · Post by **passengerpete** » Sun Oct 16, 2011 8:11 am

have been starting to collect shit.... bits i think i might need in the future.
so have a open 4.8 diff from a wide body terrano that i want to some type of locker into not sure what to go with. a self locking type eg lock right or a air locking type.
also have brought a spear td27t out of a stolen bunt out Ute funny thing it was my old Ute only sold it to her two mounts ago bummer for her good for me. its had a good burn not sure what i could still use ? i only wanted it so i could mate a new gearbox to it so it could slip into my truck when i was ready.
also have got my grubby little paws on a nissan safari gq 5 speed so let the mating begin (in-cert porn music here lol) also got a terrano peddle box of trade me for $10.
having great fun playing with project it quite addictive this 4wd caper. can see a lot of wasted time in the shed in the future one day it might even go off road. the term 'maller' comes to mind like a rock crawler but only driving to the shops/mall lol.

passengerpete · Post by **passengerpete** » Sun Oct 16, 2011 8:11 am

double up cant remove

passengerpete · Post by **passengerpete** » Sun Oct 16, 2011 8:24 am

just on a side note the safari pto winch, whats need to get it going. im guessing the winch drum the pto shaft and something that goes into the gear box ? just curious thats all

passengerpete · Post by **passengerpete** » Mon Nov 14, 2011 7:39 pm

intercooler finished will put a pic up when its all painted up and looks prity, have added recaro seats too. best mod to date i think simple install too.

keithal · Post by **keithal** » Mon Nov 14, 2011 8:44 pm

what are the recaro's out of if u dont mind me asking?

passengerpete · Post by **passengerpete** » Mon Nov 14, 2011 9:03 pm

bighorn the 3.1 diesel one

keithal · Post by **keithal** » Mon Nov 14, 2011 9:10 pm

passengerpete wrote:bighorn the 3.1 diesel one

are they a straight bolt in?

passengerpete · Post by **passengerpete** » Tue Nov 15, 2011 5:13 pm

keithal wrote:
passengerpete wrote:bighorn the 3.1 diesel one

are they a straight bolt in?

no not a straight bolt in used angle iron on one side and flat bar on the other, but no welding was needed still used std terrano seat runners if any thing seat feels about 10mm lower then std.

passengerpete · Post by **passengerpete** » Fri Nov 18, 2011 10:07 pm

starting to get measurements together, to make a gq gearbox to td27t bell housing or an adaptor plate. so far it looks like a terrible idea because it not even remotely close. but im sure ill get it to work

kbjj · Post by **kbjj** » Sat Nov 19, 2011 6:30 pm

I believe a td27t auto bellhousing, will bolt onto a td42 auto. Not sure what needs to be done with spigots thou. I know you've got manuels, but an old td27t auto bellhousing may make life easier.

passengerpete · Post by **passengerpete** » Sat Nov 19, 2011 10:47 pm

interesting will look in to that, thanks

passengerpete · Post by **passengerpete** » Sat Nov 19, 2011 11:06 pm

water to air intercooler all done im happy with the result.

got a mate to tig in a boss to mount the boost line.into the intake rummer, ya can see the spacer in this shot to

passengerpete · Post by **passengerpete** » Sat Nov 19, 2011 11:13 pm

also pulled the relief valve of old burnt out engine and welded a plate over it to stop it venting boost over 14psi.

passengerpete · Post by **passengerpete** » Sat Nov 19, 2011 11:26 pm

body lift is next just to give me more room for gearbox and stop the intercooler from rubbing on bonnet.

sibainmud · Post by **sibainmud** » Sun Nov 20, 2011 1:39 am

Nice

What boost you planning?
Keep it up.

crazyclark31 · Post by **crazyclark31** » Sun Nov 20, 2011 9:03 am

very neat and tidy. nice. almost looks factory

slide · Post by **slide** » Sun Nov 20, 2011 1:58 pm

Looks good

Might just have to get rid of that u-r-a-bus sticker from cooler :lol:

passengerpete · Post by **passengerpete** » Sun Nov 20, 2011 8:41 pm

slide wrote:Looks good
Might just have to get rid of that u-r-a-bus sticker from cooler

lol, all sorted my flat mate is a sign writer will turn the Subaru into a Nissan so it will look factory.

passengerpete · Post by **passengerpete** » Sun Nov 20, 2011 8:43 pm

sibainmud wrote:Nice
What boost you planning?
Keep it up.

thanks not sure what boost ill run just yet. at mo im running 12psi

passengerpete · Post by **passengerpete** » Sun Nov 20, 2011 8:48 pm

so started the body lift to day got mostly done just a few wee things to do with hand brake cables ect

i also pulled of the running board off before they get bent all so found so jap coins and chewing gum look funny i get a pic latter

passengerpete · Post by **passengerpete** » Mon Nov 21, 2011 5:47 pm

some stuff i found when i pulled out carpet to do body lift. im rich lol

passengerpete · Post by **passengerpete** » Mon Nov 21, 2011 5:50 pm

td27t backing plate inside the td42 bell housing

passengerpete · Post by **passengerpete** » Mon Nov 21, 2011 5:59 pm

if any one has a td27 manual gearbox out of there truck at the mo could you please measure how far the input sticks out past the bell housing edge. the easiest way would be to put a straight across the face of bell-housing then measure the protruding end of input shaft thanks

passengerpete · Post by **passengerpete** » Mon Nov 28, 2011 8:30 pm

finished off body lift, raised front bumper but wil leave back one low so can mount some hooks above it,

passengerpete · Post by **passengerpete** » Mon Nov 28, 2011 8:42 pm

found some spot lights on tm so put em on and run the wires

passengerpete · Post by **passengerpete** » Mon Dec 05, 2011 4:29 pm

put in new springs its a bit highter then i was expecting

another terrano/safari project = terrari

Re: another terrano project.

Re: another terrano project.

Re: another terrano project.

Re: another terrano project.

Re: another terrano project.

Re: another terrano project.

Re: another terrano project.

Re: another terrano project.

Re: another terrano project.

Re: another terrano project.

Re: another terrano project.

Re: another terrano project.

Re: another terrano project.

Re: another terrano project.

Re: another terrano project.

Re: another terrano project.

Re: another terrano project.

Re: another terrano project.

Re: another terrano project.

Re: another terrano project.

Re: another terrano project.

Re: another terrano project.

Re: another terrano project.

Re: another terrano project.

Re: another terrano project.

Re: another terrano project.

Re: another terrano project.

Re: another terrano project.

Re: another terrano project.

Re: another terrano project.