19th-20th nov

[coxsy]

seeing as i got up early I'll start this one
wash and a coat of wax on the safari, change back to simex tyres,
manukau club christmas bbq trip sunday

[kbushnz]

wash and a coat of wax

mine hasn't seen that since 2001
Started re designing the storage/draw layout in the rear of the truck.
Sick and tired of a heavy wheel hanging off the rear door and obstructing the view...(flippin big 35's)
So its now laying on the rear floor and building a composite drawer system around it.
Note: My old drawer system will be offered for sale shortly...
Fits the LJ / KZJ LWB square cruisers...

Calvin

[coxsy]

well it's a sort of body condition check too,

[KIWI_TERRANO]

got pulled over today for a "random reg wof and ruc check" cop then gave me a verbal warning to remove my balls that I have under rear of truck and that if he says me one more tim with them he will remove them and that my tjm brush bars have to be removed as they are not airbag compatable? dont understand why a fleetcompany(owner before me) would put them on a fleet vehicle if they dont comply but now I have to take them off

[crazyclark31]

got pulled over today for a "random reg wof and ruc check" cop then gave me a verbal warning to remove my balls that I have under rear of truck and that if he says me one more tim with them he will remove them and that my tjm brush bars have to be removed as they are not airbag compatable? dont understand why a fleetcompany(owner before me) would put them on a fleet vehicle if they dont comply but now I have to take them off

I'd say he just doesn't like 4wds. He can't order them off unless he has the correct qualifications and/or has evidence to prove they not compatible.
Guy down here has home made bull bars on his a/bag surf. Got a sleeve thing made up forside bars and they passed a cert sweet as

[KIWI_TERRANO]

got pulled over today for a "random reg wof and ruc check" cop then gave me a verbal warning to remove my balls that I have under rear of truck and that if he says me one more tim with them he will remove them and that my tjm brush bars have to be removed as they are not airbag compatable? dont understand why a fleetcompany(owner before me) would put them on a fleet vehicle if they dont comply but now I have to take them off

I'd say he just doesn't like 4wds. He can't order them off unless he has the correct qualifications and/or has evidence to prove they not compatible.
Guy down here has home made bull bars on his a/bag surf. Got a sleeve thing made up forside bars and they passed a cert sweet as

Il keep that in mind, hes the local cop and there plentyyyyyyyy of 4wds up here and he will keep a eye on me I know

[crazyclark31]

Il keep that in mind, hes the local cop and there plentyyyyyyyy of 4wds up here and he will keep a eye on me I know[/quote]

To prevent an hassles maybe getting it checked out would help?

[muddyhilux]

sounds like hes a dick ,he cant do anything about the balls,they're not illegal,he might have a point about the bush bars but as said there's ways to make them legal,go double check them with local certifier and get a written statement they're fine and compatible then next time he pulls you over say here you go sir,all legal and have a good day

nothing pisses me off more than cops picking on people for no good reason,no wonder they don't have enough time to deal with real crime like a billion trucks being stolen etc

[mazdamike]

to be compatible it must have a sticker on it. Check to see if in fact it is compatible and the sticker just hasnt been removed.

[89lux]

to be compatible it must have a sticker on it. Check to see if in fact it is compatible and the sticker just hasnt been removed.

i can get those stickers i have plenty in my tool box. the proper tjm ones

[Cameron]

I dont get how they can or can't be airbag compatible. don't airbags run of an inertia switch or something anyways?
also lol at him making you remove balls or something. put another few sets under there. lol.
sounds like a knob. straight outta cop college rookie? those are the worst.

[Jerry]

got pulled over today for a "random reg wof and ruc check" cop then gave me a verbal warning to remove my balls that I have under rear of truck and that if he says me one more tim with them he will remove them and that my tjm brush bars have to be removed as they are not airbag compatable? dont understand why a fleetcompany(owner before me) would put them on a fleet vehicle if they dont comply but now I have to take them off

Go and have a chat to TJM (Fully Equipped are the agents), get them to confirm the bars are ok. you would have been pulled up on wofs if they were not compliant. may be worth checking with your wof guy as well. Get stuff in writing if you can. maybe worth discussing/complaining at local police station (ie not the one that pulled you over) if it all checks out.

Airbag compatibilty is on the front bar where the airbag sensor is not the side bars or the rear bars.

What are "balls underneath"?

[chrome]

truck nuts gerry, big hairy ball bags

[kbushnz]

What are "balls underneath"?

[KIWI_TERRANO]

my nits are black to so not like they stand out, I think he just wasnt getting any tourist speeding through town so he saw me and went hey, Arb guy tried saying I need arb bars as there better for air bags but I wouldnt know, going to ring fully equipd on monday see what the go is then go from there.

Usually hes a good sort to deal with so think something had yanked his chain.

[Jerry]

maybe he is just jealous your ford is better than his holden

maybe these are covered under external fittings or something for a wof?, do you need to get your balls rated or certified or something

[meece4x4]

maybe these are covered under external fittings or something for a wof?, do you need to get your balls rated or certified or something

thanks Jerry, I now have a mouthful of coffee all over my laptop screen

[yael]

BAHAHAHAHAHA is all I have to say...

maybe he is just jealous your ford is better than his holden

maybe these are covered under external fittings or something for a wof?, do you need to get your balls rated or certified or something

[coxsy]

before and after polish

[sibainmud]

Went on Woodhill patrol with Drurban today.
Drove all the virgin tracks.
Had Andy3542 and Hilux Dan on board.
Meet Churchill there too.
Drove up some hills and down.
Churchill broke a rear drive shaft.
Drurban smoked his clutch.
First time it was dry enough to drive this 5 week old track.
First one to climb this
Then everyone gave it a go with mixed results


Cheers,

[Drurban]

Yeah Like Sibainmud said great day at Woodhill patrol, got my clutch hot and bothered, then my C.V decided to lock up on
me I then reversed it and then it was all sweet.
Here is my attempt of the un-drivable Hillclimb


Here is Sibainmuds climb from different angle


But YEAH BOI THE MU MADE IT UP ON FIRST ATTEMPT

So Happy.

[vvilly]

my nits are black to so not like they stand out, I think he just wasnt getting any tourist speeding through town so he saw me and went hey, Arb guy tried saying I need arb bars as there better for air bags but I wouldnt know, going to ring fully equipd on monday see what the go is then go from there.

Usually hes a good sort to deal with so think something had yanked his chain.

Shagga just be aware that not all tjm bars are abs compatible mine wasnt

[Newkid]

Went in and kinda helped the guys up in Rallywoods yesterday. Mainly just played passenger with i think it was Mudnuts (Rob) Met Curly, Reece, and Tony. Awesom trucks, awesom day! Was kick ass meeting everyone.

[kbushnz]

Fitted up a 35x12.5 BFG and tube to a spare rim. Did it the old fashioned way and wrestled it around the garage floor. At least now I know I can fit one up.....
Just need to practice un beading......
Scored some mags and good tyres for my bubble car.....Looks sweet !!
Well sweeter than before

[rokhound]

Peeled off the exo, front gaurds and body. Removed fule tank so it could get reworked into a shape that works better around the rear axle. Also pulled out the rear axle and made 4 new links that are 80mm longer, then painted it and put it all back together. Just waiting on the rear driveshaft and all will be good again. Might paint it while the cage is off and sort the winch and rear battery box.

[chrome]

found some paint for a good price this week, its a mil spec chemical resistance paint so if any bugger gasses my ride with nerve gas i can clean it off real easy
its a 2k primer/filler paint. will probably need a flat clear over it
my mrs hates the colour but i like it, the more coats it gets the darker it is

[vinceparts]

went and did maratoto / wires track up to the river hutt inn on saturday , 1kz surf, turbo V8 diesel 08 landcruiser , and my 3L double cab, pretty awesome day out there, only sorted out these two videos so far, go pro camera , will be more as soon as mate edits them

also started making a plate style bumper the other w.e, only half done , but im pretty happy with it so far

[Filthy4x4]

Had a pretty casual weekend... Spent saturday helping a mate make a 3" exhaust got halfway then decided to call it a night.

Went and looked at a new property today, sick of living in town. Found a nice place in a rural area with a bit of land (unfortunately, cant 4wd on it )

[Cameron]

went to an open home today myself, actually. house was the most weird, bodged, and derelict place I've seen in a long time. far out.

[mudlva]

joined the Thames lads and did the maratoto wires loop today
only a couple of breakages a leaf spring and a wheel fell off happened to be on the same truck at differant intervals other wise all good

took around 7 hours including limping out the broken lad

had a great day

i will see if i can get some photos posted