Removing stuck swaybar links on an LN130

Mattman · Post by **Mattman** » Sun Sep 17, 2006 12:04 pm

I have unbolted the linkage that goes through the lower arm however the steel sleeve between the lower arm and the swaybar has welded itself to the bolt.

I have tried lots of persuasion, soaked it overnight in WD40 but still no luck.

The confined space makes it impossible to use heat or to try and cut it off.

Anyone have any ideas? I may have to pull the wheel carrier assembly so that I can get in and cut it out.

Cheers
Matt.

Mattman · Post by **Mattman** » Sun Sep 17, 2006 1:11 pm

Updated - removed the wheel carrier assembly and got in with the big grinder and cut it off.

Cheers
Matt.

wopass · Post by **wopass** » Sun Sep 17, 2006 9:14 pm

Mattman wrote:Updated - removed the wheel carrier assembly and got in with the big grinder and cut it off.

Cheers
Matt.

allways a satisfying way to do things, like saying...

TAKE THAT ! BIARCH ! !

and then having a little chuckle :lol:

Mattman · Post by **Mattman** » Sun Sep 17, 2006 9:20 pm

Slowed me up though, the other side was so easy it caught me unprepared for it though the farker!

Cheers
Matt.

Removing stuck swaybar links on an LN130

Removing stuck swaybar links on an LN130

;-p