standard D=
no guard
no bumper, grill, headlights etc
WOF issue?
WOF issue?
old motor before been taken out
New Project
-
BeamedSurf
- Bush Crasher
- Posts: 69
- Joined: Sun Nov 13, 2011 8:32 pm
- Location: North Canterbury
New Project
just bought this 1985 LN60(was mistaken, thought it was a LN61) beamed surf, planning on putting a 3L motor and box in and slapping a turbo on it =D, then 3" snorkel, 33's, 4" suspension lift, black spokes with mean offset. So far thats all thats planned at this stage, might take a while as money is an issue as im on 17 =D
standard D=
no guard
no bumper, grill, headlights etc
WOF issue?
WOF issue?
old motor before been taken out
standard D=
no guard
no bumper, grill, headlights etc
WOF issue?
WOF issue?
old motor before been taken out
Toyota Hilux Surf SSR LN60 Beam Axle
Build in progress
Build in progress
-
uptomynutsinruts
- Hard Yaka
- Posts: 294
- Joined: Sat Oct 29, 2011 10:06 am
- Location: Ashburton
Re: New Project
Bit of a scratch on the front right dont ya think 
-
BeamedSurf
- Bush Crasher
- Posts: 69
- Joined: Sun Nov 13, 2011 8:32 pm
- Location: North Canterbury
-
ClassicCruiserSpares
- Sausage Shack
- Posts: 1259
- Joined: Sat Jan 16, 2010 9:16 pm
- Location: Christchurch,
Re: New Project
uptomynutsinruts wrote:Bit of a scratch on the front right dont ya think
I wouldnt worry about it, itll buff out!!
Toyota Landcruiser FJ40, front and rear lockers, 35" simex.
Toyota FJ45 build in progress.
Tires are like boobs, they always look big until you have played with them for a while, then you just want a bigger set.
Toyota FJ45 build in progress.
Tires are like boobs, they always look big until you have played with them for a while, then you just want a bigger set.
-
BeamedSurf
- Bush Crasher
- Posts: 69
- Joined: Sun Nov 13, 2011 8:32 pm
- Location: North Canterbury
Re: New Project
im buying one very simliar from nibz but with a 2.4 in it got any major plans for yours?
-
BeamedSurf
- Bush Crasher
- Posts: 69
- Joined: Sun Nov 13, 2011 8:32 pm
- Location: North Canterbury
Re: New Project
plans at the moment are:
1. 2.8 motor and box
2. 4" suspension lift
3. Black spokes with big offset
4. 33" mud tyres
5. Snorkel
6. Turb 2.8 motor
so far, this list will probably grow after some time
1. 2.8 motor and box
2. 4" suspension lift
3. Black spokes with big offset
4. 33" mud tyres
5. Snorkel
6. Turb 2.8 motor
so far, this list will probably grow after some time
Toyota Hilux Surf SSR LN60 Beam Axle
Build in progress
Build in progress
Re: New Project
That's is going to be some project. You must be thinking about Lexus v8 stereo system.
Latest mod, pin stripes, hit the same branch I did on the way in on the way out.
ford ranger wildtract and sj.
ford ranger wildtract and sj.
-
BeamedSurf
- Bush Crasher
- Posts: 69
- Joined: Sun Nov 13, 2011 8:32 pm
- Location: North Canterbury
Re: New Project
oh ive got two 8" subs, 2 fusion 6x9s and a 1400w amp just waitin for it 
Toyota Hilux Surf SSR LN60 Beam Axle
Build in progress
Build in progress
-
ClassicCruiserSpares
- Sausage Shack
- Posts: 1259
- Joined: Sat Jan 16, 2010 9:16 pm
- Location: Christchurch,
Re: New Project
BeamedSurf wrote:oh ive got two 8" subs, 2 fusion 6x9s and a 1400w amp just waitin for it
If your going to fit them make sure there on the roof, if you get stuck in deep water you can say good by to that stuff, That happend to me years ago.
Toyota Landcruiser FJ40, front and rear lockers, 35" simex.
Toyota FJ45 build in progress.
Tires are like boobs, they always look big until you have played with them for a while, then you just want a bigger set.
Toyota FJ45 build in progress.
Tires are like boobs, they always look big until you have played with them for a while, then you just want a bigger set.
Re: New Project
ClassicCruiserSpares wrote:BeamedSurf wrote:oh ive got two 8" subs, 2 fusion 6x9s and a 1400w amp just waitin for it
If your going to fit them make sure there on the roof, if you get stuck in deep water you can say good by to that stuff, That happend to me years ago.
Me too, except my $60 warehouse american Hi-Fi Headunit that was submerged for half an hour, after 3weeks of drying out, works fine haha
-
BeamedSurf
- Bush Crasher
- Posts: 69
- Joined: Sun Nov 13, 2011 8:32 pm
- Location: North Canterbury
Re: New Project
haha top quality amreican hi-fi right there
Toyota Hilux Surf SSR LN60 Beam Axle
Build in progress
Build in progress
Re: New Project
go for marine speakers,they dont mind the water so much. dont know if they do the subs though
rough 'n' ready
-
BeamedSurf
- Bush Crasher
- Posts: 69
- Joined: Sun Nov 13, 2011 8:32 pm
- Location: North Canterbury
Re: New Project
Engine and box out
Engine and box out
Toyota Hilux Surf SSR LN60 Beam Axle
Build in progress
Build in progress