How much meths in tank to remove water

For all topics relating solely to diesel engines and modifications
Post Reply
pruggerdore
Hard Yaka
Posts: 610
Joined: Wed Oct 07, 2009 1:14 am
Location: hawkes bay

How much meths in tank to remove water

Post by pruggerdore »

Have a bit of water in diesel tank. have drained tank and am wanting to do the old trick of putting methylated spirits in tank with the fresh fill to make the water pass thru the system harmlessly. is this a good idea now days on a diesel.? and how much to use.??? is it dangerous to use to much. deranged reckons only a teaspoon to a tankfull which seems like a very small amount to me hardly worth bothering with
anybody have any experience ?
might be better to play it safe and buy a genuine injector type cleaner
opinions???
User avatar
ClassicCruiserSpares
Sausage Shack
Posts: 1259
Joined: Sat Jan 16, 2010 9:16 pm
Location: Christchurch,

Re: How much meths in tank to remove water

Post by ClassicCruiserSpares »

Last time i done it i put a whole 1L bottle of meths in with a full tank of fuel.
Toyota Landcruiser FJ40, front and rear lockers, 35" simex.
Toyota FJ45 build in progress.
Tires are like boobs, they always look big until you have played with them for a while, then you just want a bigger set.
User avatar
Jerry
Yes Dear
Posts: 8325
Joined: Tue May 30, 2006 12:00 pm
Location: Wellington 027 479 2417

Re: How much meths in tank to remove water

Post by Jerry »

I chucked a 1L in mine
70 series prado (KZJ78) and 90 Series Prado (KZJ95)
User avatar
Mudde1
Hard Yaka
Posts: 496
Joined: Sat Jan 31, 2009 5:56 pm

Re: How much meths in tank to remove water

Post by Mudde1 »

it is an old wife's tale. it wont work. Try it on a small scale in a glass
Tony.
User avatar
Sadam_Husain
Angry bird
Posts: 5164
Joined: Mon Feb 20, 2006 12:00 pm
Location: WELLINGTON

Re: How much meths in tank to remove water

Post by Sadam_Husain »

a bit off topic but years ago I ripped a rear brake line out in the bush so we clamped a pair of vice grips on the hose and refilled and bled the system up with a bottle of meths and I drove around for a month or two before I got around to replacing the brake line and fluid :oops: :mrgreen:
User avatar
ClassicCruiserSpares
Sausage Shack
Posts: 1259
Joined: Sat Jan 16, 2010 9:16 pm
Location: Christchurch,

Re: How much meths in tank to remove water

Post by ClassicCruiserSpares »

Mudde1 wrote:it is an old wife's tale. it wont work. Try it on a small scale in a glass


It sorted my problems, and had no other issues. It works well.
Toyota Landcruiser FJ40, front and rear lockers, 35" simex.
Toyota FJ45 build in progress.
Tires are like boobs, they always look big until you have played with them for a while, then you just want a bigger set.
ice4x4
Hard Yaka
Posts: 247
Joined: Mon Nov 15, 2010 2:38 pm
Location: Napier

Re: How much meths in tank to remove water

Post by ice4x4 »

Mudde1 wrote:it is an old wife's tale. it wont work. Try it on a small scale in a glass


No it will work!

Meths is Hygroscopic which means it attracts, absorbs and retains water 8) . It is also pretty flammable so it can be burned with the fuel in the engine. Alcohol would do the same, you could always chuck in a bottle of Jack :lol: :lol:
1988 Range Rover Classic
2010 Discovery 4 HSE 5.0 V8

[img]http://i251.photobucket.com/albums/gg303/eastw77/2_zpse514cc6c.gif[/img]
User avatar
samewan
Hard Yaka
Posts: 273
Joined: Tue Oct 04, 2011 10:05 pm
Location: chch

Re: How much meths in tank to remove water

Post by samewan »

that would be a waste of jack if your throwing it away ill have a couple bottles....
User avatar
yael
Hard Yaka
Posts: 110
Joined: Mon Dec 13, 2010 8:57 pm
Location: West Auckland

Re: How much meths in tank to remove water

Post by yael »

Rule of thumb I've been taught is 1L to 70-100L of fuel..

but you can buy a product that I have used alot of in the past and has worked really well in my old truck and I've seen good results from it being used in the marine industry is this
http://www.vms.co.nz/VMS_products/fuel_ ... octor.html

Cheers Yael
If you cant beat us Gingers, JOIN US!!
User avatar
tweake
Hard Yaka
Posts: 2212
Joined: Tue Jan 01, 2008 12:00 pm
Location: start of northland

Re: How much meths in tank to remove water

Post by tweake »

Don't do it on a diesel.

meths soaks up water ok, BUT it can make the water go through the water filter and damage your IP/injectors.

just dry the tank out best you can and refill with diesel. provided its only a small amount the water, it will just get caught in the filter. if worried about it put in 200ml of marine 2 stroke oil.
User avatar
slide
Hard Yaka
Posts: 895
Joined: Sun May 15, 2011 9:04 pm
Location: Nelson

Re: How much meths in tank to remove water

Post by slide »

What vehicle/ engine pruggerdore?
If its a new common-rail do not do anything but get rid of every tiny drop of water from the tank. Meths lets water go through filter and wreak havoc with injectors and pump... mega $$$
pruggerdore
Hard Yaka
Posts: 610
Joined: Wed Oct 07, 2009 1:14 am
Location: hawkes bay

Re: How much meths in tank to remove water

Post by pruggerdore »

our camper99 4.2 isuzu diesel normal mechanical injection.left cap off at servo after filling (you cant see it under the fibreglass sides ) was waterblasting it at home when I noticed cap missing after the water blaster had been over it several times. yea Im of 2 minds too. you trust the water traps to catch the water and do nothing. I dont believe the water traps work much at all. or you add something to the tank that attracts the water then tries to carry it thru the system harmlessly if it dosnt get thru its not good for the pump and injectors.....
damed if you do, damed if you dont lol
maybe we should have a vote

can anybody say that meths will carry the water right thru harmlessly with technical knowledge to back it up.

Ian, "Ice 4x4" you seem to have science behind you ???

keep the opinions coming guy's appreciate it.
User avatar
Mudde1
Hard Yaka
Posts: 496
Joined: Sat Jan 31, 2009 5:56 pm

Re: How much meths in tank to remove water

Post by Mudde1 »

ice4x4 wrote:
Mudde1 wrote:it is an old wife's tale. it wont work. Try it on a small scale in a glass


No it will work!

Meths is Hygroscopic which means it attracts, absorbs and retains water 8) . It is also pretty flammable so it can be burned with the fuel in the engine. Alcohol would do the same, you could always chuck in a bottle of Jack :lol: :lol:

I am not saying it wont absorb some water, the problem is that it wont absorb a massive amount, and because meths is mostly ethanol (Denatured alcohol) you will be running with a large proportion of ethanol in your fuel. this may give a short term improvement in performance, but most modern engines wont like that for very long.
Tony.
ice4x4
Hard Yaka
Posts: 247
Joined: Mon Nov 15, 2010 2:38 pm
Location: Napier

Re: How much meths in tank to remove water

Post by ice4x4 »

Mudde1 wrote:
ice4x4 wrote:
Mudde1 wrote:it is an old wife's tale. it wont work. Try it on a small scale in a glass


No it will work!

Meths is Hygroscopic which means it attracts, absorbs and retains water 8) . It is also pretty flammable so it can be burned with the fuel in the engine. Alcohol would do the same, you could always chuck in a bottle of Jack :lol: :lol:

I am not saying it wont absorb some water, the problem is that it wont absorb a massive amount, and because meths is mostly ethanol (Denatured alcohol) you will be running with a large proportion of ethanol in your fuel. this may give a short term improvement in performance, but most modern engines wont like that for very long.


Clive said he had drained his tank so any water left will be a trace. If its an 80ltr tank and he puts in say 200ml of Meths that will be 0.0025% Hardly a large proportion! Cant really see that giving any gains in performance or affecting the engine in the slightest. Probably wouldnt do it all the time though but in this case there would be no need to. Unless Clive plans on water blasting the inside of his fuel tank every week. :lol:
1988 Range Rover Classic
2010 Discovery 4 HSE 5.0 V8

[img]http://i251.photobucket.com/albums/gg303/eastw77/2_zpse514cc6c.gif[/img]
User avatar
Moriarty
Hard Yaka
Posts: 1205
Joined: Wed May 31, 2006 12:00 pm
Location: The newly formed Nation of OKATO

Re: How much meths in tank to remove water

Post by Moriarty »

ice4x4 wrote:
Clive said he had drained his tank so any water left will be a trace. If its an 80ltr tank and he puts in say 200ml of Meths that will be 0.0025% Hardly a large proportion! Cant really see that giving any gains in performance or affecting the engine in the slightest. Probably wouldnt do it all the time though but in this case there would be no need to. Unless Clive plans on water blasting the inside of his fuel tank every week. :lol:


Its NOT the ratio of meths to Diesel that matters, but the ratio of meths to WATER.

As an experiment once when we had ethanol for our racing bikes, I managed to mix a 50/50 eth to water. BUT I had to shake the mix like crazy, and it took days to "soak" it all up and if I left it, it would seperate out again. I did manage to get a lessor ration, 15%water 85% Ethanol to mix and pass through reliably a PETROL engine. (My old PB Cresta Vauxhal!!! ) also a RD400 Yamaha .

I would NOT try it with a Diesel.
Cameron
Hard Yaka
Posts: 733
Joined: Mon Sep 13, 2010 2:34 pm

Re: How much meths in tank to remove water

Post by Cameron »

I've done it a few times on 'bikes before. wouldn't on a diesel. on a petrol I guess it jsut lets it all kinda mix in and hang in suspension instead of sitting on the bottom/top and all going through at once. with a diesel I'd be inclined to drain the tank, maybe remove it, slosh some petrol round in it, drain again, refit tank, and brim it.
bonus is that your tank will be 100% clean after that. no scabby bits at the bottom.
User avatar
Nivapulledout
Hard Yaka
Posts: 316
Joined: Sat Nov 07, 2009 6:53 pm
Location: High seas or Te Awamutu

Re: How much meths in tank to remove water

Post by Nivapulledout »

as A 10 year A grade Diesel mech and 8 year Marine engineer my advice is if you have drained the tank as Well as you can then you just need to fill it back up with clean diesel and off you go. your filters will take out what little is left in there.

do not put meths in your tank, ok for petrol not diesel!!!
pruggerdore
Hard Yaka
Posts: 610
Joined: Wed Oct 07, 2009 1:14 am
Location: hawkes bay

Re: How much meths in tank to remove water

Post by pruggerdore »

well guys apreciate all the opinions and have decided to simply trust the water trap to do what it's suposed to do. drain it regularly. replace filter after 1 tank and hope for the best. campervan is cruising (hopefuly) in the new year so will let you know the out come
Thanks Clive
Post Reply

Return to “Diesel Engines and Modifications”