Runva winch seal help.

madlux · Post by **madlux** » Wed Jan 11, 2012 6:11 pm

Hey guys, taken my winch apart to service it and for some reason the large seal that runs against the drum to seal the motor side has ripped/shredded for some reason?? So water has been getting in.. Any chance anyone knows where i could find one of those large odd seals, tryed Mike but doesnt have anything in sock. Cheers Ben

klompy · Post by **klompy** » Wed Jan 11, 2012 6:16 pm

If your in welly go to Pacific Seals and they will make you one.Ask for a price first,goodluck.

sibainmud · Post by **sibainmud** » Wed Jan 11, 2012 6:23 pm

Seal imports, Seal house, advanced seals, auckland bearings come to mind.
Good luck, Ben.
Cheers,

Drurban · Post by **Drurban** » Wed Jan 11, 2012 6:31 pm

Bummer about the seal Ben, but looking forward once it is all together it will look way different.

How long did Mike say he would have seals in stock???

madlux · Post by **madlux** » Wed Jan 11, 2012 6:45 pm

Cheers for the replys, tryed auckland bearings today - no luck. Will try seal imports. Yeah Ruben it should look good, the paint has turned out mint so far hopefully it wont flake off like the orignal stuff!! :roll:

Mudhog · Post by **Mudhog** » Wed Jan 11, 2012 7:22 pm

I have some winch drum seals for our winches, not sure if they will fit.

Can you post a picture and put up some sizes and I'll check to see if they might work for you. :roll:

Cheers Brett
021 724 309

madlux · Post by **madlux** » Wed Jan 11, 2012 8:46 pm

Not the best pic. Anyway roughly measures from the back 110mm o/d, 100mm i/d. the ring that sits in and hold the seal to the housing is about 4mmx4mm, hope that makes sense. Cheers

Mudhog · Post by **Mudhog** » Wed Jan 11, 2012 10:07 pm

Sorry Ben,

It looks like our ones are different in shape and fitment. :roll:

Hope you can find something that will work.

Cheers
Brett

madlux · Post by **madlux** » Thu Jan 12, 2012 6:59 am

Appreciate the help Brett, (maybe i should of gone for a tigerz11) :roll:

Cheers, Ben

kiwipete · Post by **kiwipete** » Thu Jan 12, 2012 8:06 am

Have you tried contacting Runva in Australia for the said part?

madlux · Post by **madlux** » Thu Jan 12, 2012 1:41 pm

Nope, thought they just came straight from CHINA, will check out google. cheers

madmike · Post by **madmike** » Thu Jan 12, 2012 1:50 pm

They are now in stock again. Give me a call 021535007.

madlux · Post by **madlux** » Thu Jan 12, 2012 3:47 pm

Cheers Mike, That is really quick reliable service!!!!!! mission is now over, get to slap it back together :mrgreen:

madmike · Post by **madmike** » Thu Jan 12, 2012 4:17 pm

You are welcome mate! Now go give that winch a hard time - it loves it

Happy Winching.

Runva winch seal help.

Runva winch seal help.

Re: Runva winch seal help.

Re: Runva winch seal help.

Re: Runva winch seal help.

Re: Runva winch seal help.

Re: Runva winch seal help.

Re: Runva winch seal help.

Re: Runva winch seal help.

Re: Runva winch seal help.

Re: Runva winch seal help.

Re: Runva winch seal help.

Re: Runva winch seal help.

Re: Runva winch seal help.

Re: Runva winch seal help.