BJ74 wouldn't start

For all topics relating solely to diesel engines and modifications
Post Reply
User avatar
mbw
Bush Crasher
Posts: 94
Joined: Sun Sep 18, 2011 8:44 pm
Location: Christchurch

BJ74 wouldn't start

Post by mbw »

Hi,

On saturday I went to move my Landcruiser, but it didn't want want to turn over. when you turned the ignition on, everything lights up fine, but when you turn it to start, nothing.

The clock on the dash fades, so it looks like it's drawing current, but nothing happens.

Went through and check battery's and all fuses and relays (that I could find).

It didn't seem to get any power to the starter motor, when key was turned.

I had neighbor over and he checked all he could think of, but to no avail.

So gave up and had a few beers. When I was seeing him out, I thought I would try start it and started first go.

I went on a trip yesterday, no problems.

Anybody got any ideas what it could be? is there a relay between ignition switch and starter?
jakwoo39
Hard Yaka
Posts: 210
Joined: Wed Jan 05, 2011 2:23 pm
Location: Dunedin

Re: BJ74 wouldn't start

Post by jakwoo39 »

check connections on batteries and starter motor, could be something real simple like that
User avatar
callum007
Hard Yaka
Posts: 1143
Joined: Tue May 30, 2006 12:00 pm
Location: Dunedin
Contact:

Re: BJ74 wouldn't start

Post by callum007 »

Starter solenoid sounds like a good place to check. or the starter itself is not pulling in properly. If it does it again, give the starter and or the solenoid a whack with a hammer or your forehead.
Dont follow me. i'll get stuck and need a tow..
User avatar
mbw
Bush Crasher
Posts: 94
Joined: Sun Sep 18, 2011 8:44 pm
Location: Christchurch

Re: BJ74 wouldn't start

Post by mbw »

Tried smacking the starter, but didn't seem to be getting any power to solenoid side of starter motor.

Battery connections are ok, got power everywhere else.
User avatar
H2OLOVA
Hard Yaka
Posts: 1153
Joined: Tue Jun 06, 2006 12:00 pm
Location: Christchurch

Re: BJ74 wouldn't start

Post by H2OLOVA »

sometimes the ignition barrel comes loose and depending on how you hold the key it may sometimes work. Something else to check anyway.
***Got the balls, just ain't got the bucks***
User avatar
mbw
Bush Crasher
Posts: 94
Joined: Sun Sep 18, 2011 8:44 pm
Location: Christchurch

Re: BJ74 wouldn't start

Post by mbw »

I did wonder about that, but when you turn the key to start it, the clock on the dash fades out, so it looks like something is draining power hence switch must be doing something????
Post Reply

Return to “Diesel Engines and Modifications”