Show us your Toyota

[tgaguy1]

Thought I had better show my latest tow wagon/daily driver. I got a little carried away on the mods for a daily driver maybe .

Before



and after many mods and many hours of tinkering.





It usually has 33" coopers on it, but this was taken just before a weekend away to the central plateau, so had the mud tyres fitted borrowed from the rough truck.
Here is an action shot from that weekend



and here is the my surf rough truck in action

[skidmark]

buget surf at the start of it




list of mods yet to be started.

[chrome]

my new beater,
2L te manual
dings and scrapes
jerrys wheels
good base for another build me thinks
hoping to SAS and whack a bigger motor in it someday

[land bruiser]

my 1984 hj60 front and rear cable diff locks running on 15x10 and 33x13.5 mudzillas. shes out of auction at present due to turbo problems (I/ME FUCKED UP )

[Justin W]

here is my crusier

[Mongoose]

my 1984 hj60 front and rear cable diff locks running on 15x10 and 33x13.5 mudzillas. shes out of auction at present due to turbo problems (I/ME FUCKED UP )

DSCF5470_Converted.JPG

Nice! My favourite colour for 60s.

[SVDB]

Another cruiser

[land bruiser]

GO THE MIGHTY LANDCRUISER

[madlux]

My dirty doublecab

[vinceparts]

My dirty doublecab

hey i saw you in the bombing range not long after new years, my mates were driving my truck around that looks almost identical to yours but mine has a wellside and i was on my kx250 and came round the corner and saw you and was liek thats where they were and stoped and realised it wasnt my truck haha

[Jerry]

My new Playdoh



A few minor mods to come

[vinceparts]

[badnuz]

put a lexus in it jerry.... heres one on tardme with it almost ready to go..

http://www.trademe.co.nz/motors/used-cars/toyota/auction-450670532.htm

[Jerry]

Found this sweet looking surf at the warehouse for $2.99

[stinky]

Needs a winch bar Jerry

[SP450andLE]

Found this sweet looking surf at the warehouse for $2.99

That flex!

[tomsoffroad]

Found this sweet looking surf at the warehouse for $2.99

Thats awesome, dunno about the 20" wheels tho.

[89lux]

awesome i want one

[wsnownz]

Here's my prado and one from my dads collection of cruisers:

[KIWI_TERRANO]

here a updated photo of my truck,

[nztimr33]

A few pics of my hilux
Running 1UZFE Lexus V8 - link computer , R151 h/d clutch
90mm body lift
3' suspension lift
Mechanical locker in rear , lsd in front
33' GT radial m/t's
full bar work
12,000lb winch
More mods on the cards

[hello24]

Landcruiser kzj78
PTO winch
3"lift
just fitting up front mount intercooler
2.5" exhaust
allready for some tyres

[Mud Camper]

Small Block Chev, fabricated camper body 50% done

[badnuz]

A few pics of my hilux
Running 1UZFE Lexus V8 - link computer , R151 h/d clutch
90mm body lift
3' suspension lift
Mechanical locker in rear , lsd in front
33' GT radial m/t's
full bar work
12,000lb winch
More mods on the cards

seen this in action, goes well! has an 8 inch front diff head mod so should stand up well with the lexus!

[T-Boon]

A few pics of my hilux
Running 1UZFE Lexus V8 - link computer , R151 h/d clutch
90mm body lift
3' suspension lift
Mechanical locker in rear , lsd in front
33' GT radial m/t's
full bar work
12,000lb winch
More mods on the cards

seen this in action, goes well! has an 8 inch front diff head mod so should stand up well with the lexus!

Info on the mod ?

[badnuz]

far as i know (it was done in taupo from memory) removed the std IFS center(housing and all) , weld in a SFA 8 inch center, adapt a couple of things and your away!

sorry cant be more help, but i know the diff is taking the lexus power quite well....

[badnuz]

Small Block Chev, fabricated camper body 50% done

DSCF2746.JPG

removable camper unit??

[nztimr33]

far as i know (it was done in taupo from memory) removed the std IFS center(housing and all) , weld in a SFA 8 inch center, adapt a couple of things and your away!

sorry cant be more help, but i know the diff is taking the lexus power quite well....

Yup according to the guy i bought it off it was done in taupo , havent had any problems with the front diff yet other than the usual ball joints / c.v boots splitting.

Went out sunday just been and had a few dramas with the front drive shaft flange on the transfere case rubbing on the gearbox crossmember *put a new mount on not to long ago and it seemed it fix the problem up until now* , Then driving home noticed a knocking noise from the gearbox sounds like in input shaft bearing as it does it in all gears and sounds like it is right beside my left foot when driving. so called the gearbox specialist today and he reckons about $1200 to do bearings , seals , and modify the 3rd and 4th gear syncros which apparently are a weak link in the R151f box , so might be off the road for a wee while doing that , also going to do the clutch at the same time as the heavy duty puck clutch in there is a C-unt to use espically with hill starts and shudders bad also so out with that.

few pics from sunday..

[Big]

far as i know (it was done in taupo from memory) removed the std IFS center(housing and all) , weld in a SFA 8 inch center, adapt a couple of things and your away!

sorry cant be more help, but i know the diff is taking the lexus power quite well....

Yup according to the guy i bought it off it was done in taupo , havent had any problems with the front diff yet other than the usual ball joints / c.v boots splitting.

Went out sunday just been and had a few dramas with the front drive shaft flange on the transfere case rubbing on the gearbox crossmember *put a new mount on not to long ago and it seemed it fix the problem up until now* , Then driving home noticed a knocking noise from the gearbox sounds like in input shaft bearing as it does it in all gears and sounds like it is right beside my left foot when driving. so called the gearbox specialist today and he reckons about $1200 to do bearings , seals , and modify the 3rd and 4th gear syncros which apparently are a weak link in the R151f box , so might be off the road for a wee while doing that , also going to do the clutch at the same time as the heavy duty puck clutch in there is a C-unt to use espically with hill starts and shudders bad also so out with that.

few pics from sunday..

Use an organic 2000+ lb clutch and you be amazed at how suttle and apliable it is.. wut i have in mine and it is totally user freindly..

[zukmeista]

Small Block Chev, fabricated camper body 50% done

DSCF2746.JPG

I was wondering who's this was