Hilux Cross Over Tie Rod and Drag Link Questions

suzolla · Post by **suzolla** » Thu Sep 28, 2006 1:19 pm

Hi,
Planning to do an SAS on my LN61 Surf and was looking on the Marlin site at their heavy wall tube tie rod and drag links so was looking to make some, have tracked down some 1 1/4" OD x 1/4" wall tube $$$$$, does anybody know were to get the left hand and right hand thread taps to suit the tie rod end threads. They appear to be M23 x 1.5mm pitch, very odd size.
Thanks
Tim

De-Ranged · Post by **De-Ranged** » Thu Sep 28, 2006 2:22 pm

You can't unless get them cu$tom made got to get the threads lathe cut
Give me a call I make arms and links

Reece 027 541 8794

Cheers Reece

suzolla · Post by **suzolla** » Thu Sep 28, 2006 4:29 pm

Thanks for the reply Reece, I am a bit like you, like to make my own stuff and have got access to a lathe, just out of interest, what tube do you use.

Also, did you manage to take a photo of your solid axle front disc conversion, I am in the middle of doing mine.

Thanks Tim