3rd - 4th March 2012

Post what you achieved in the weekend.
Include the date of the weekend eg 25/02/2006
Thanks to Turoa for a great forum idea!
phraza
Hard Yaka
Posts: 898
Joined: Thu Oct 15, 2009 8:44 am
Location: North Shore, Auckland
Contact:

3rd - 4th March 2012

Post by phraza »

Well my weekend starts in a couple of hours.

Heading off to Queensland for 8 days with the gf, see the old lady in Gympie, visit Fraser Island ( :lol: ), doing a 4wd tour around the island while i stay there for 2 nights, heading back to the Sunshine coast and might have a look at some 4wd shops (arb, tjm etc), try find some goodies for the jeep to bring back!

Will post up some pics when i get back

Cheers
Fraser
2WD 06 Hilux... for now
User avatar
badnuz
Hard Yaka
Posts: 2367
Joined: Sat Aug 11, 2007 12:00 pm
Location: Melbourne
Contact:

Re: 3rd - 4th March 2012

Post by badnuz »

mine is about to start too, heading to "the park" this arvo to do the National park Trip this weekend.... should be wet :)
i used to Cruise, now i PATROL
phraza
Hard Yaka
Posts: 898
Joined: Thu Oct 15, 2009 8:44 am
Location: North Shore, Auckland
Contact:

Re: 3rd - 4th March 2012

Post by phraza »

badnuz wrote:mine is about to start too, heading to "the park" this arvo to do the National park Trip this weekend.... should be wet :)


Looking forward to seeing the pics already! Have a goodie!
2WD 06 Hilux... for now
User avatar
Mudhog
Hard Yaka
Posts: 230
Joined: Sat Jan 22, 2011 11:34 pm
Location: West Auckland

Re: 3rd - 4th March 2012

Post by Mudhog »

Been getting Mudhog ready for Woodhill Safety Patrol tomorrow,
it should be an interesting day with the weather bomb forecasted :twisted:
User avatar
kbushnz
Hard Yaka
Posts: 2486
Joined: Wed Sep 16, 2009 9:03 am
Location: Massey, Auckland

Re: 3rd - 4th March 2012

Post by kbushnz »

Mine started yesterday...
Transfercase removal followed with auto comming out today...
Its now in bits on the floor.
Went to change seal and noticed bush the torque converter runs in had a crack in it....(not the production joint) :cry:
So pump out and off to the Trans spares man...
Have all the bits and will install bush and seal tonignt..
Fit pump back in Sat am and start reasembling.. :mrgreen:
Cheers Calvin
KZJ78 Landcruiser Prado...
User avatar
Overkill
Hard Yaka
Posts: 294
Joined: Sun Sep 05, 2010 8:26 pm
Location: Paraparaumu

Re: 3rd - 4th March 2012

Post by Overkill »

Mudhog wrote:Been getting Mudhog ready for Woodhill Safety Patrol tomorrow,
it should be an interesting day with the weather bomb forecasted :twisted:
Has Mudhog been treated to a new Dizzy?
Image
taz01
Tazzles
Posts: 1644
Joined: Sat Nov 25, 2006 12:00 pm
Location: Lower Hutt

Re: 3rd - 4th March 2012

Post by taz01 »

Mudhog wrote:Been getting Mudhog ready for Woodhill Safety Patrol tomorrow,
it should be an interesting day with the weather bomb forecasted :twisted:

oh i helped .....somehow rang him by mistake at 6.15am :lol: :lol: suspect may cost me beer or 2 at easter for that :lol: :lol:
WARNING:
Insanity has replaced reason in the modification of this vehicle

you can follow me, but its gunna hurt
User avatar
coxsy
Hard Yaka
Posts: 5200
Joined: Tue Jun 20, 2006 12:00 pm
Location: mangere auckland

Re: 3rd - 4th March 2012

Post by coxsy »

went out and picked up a Td 4.2 block less one piston and conrod for a slow rebuild, may end up with a 0 time engine :D
Image
89 safari, pto winch, 33x15 simexs. sliders,75mm lift . turbo intercoolered
User avatar
Mudhog
Hard Yaka
Posts: 230
Joined: Sat Jan 22, 2011 11:34 pm
Location: West Auckland

Re: 3rd - 4th March 2012

Post by Mudhog »

Overkill wrote:
Mudhog wrote:Been getting Mudhog ready for Woodhill Safety Patrol tomorrow,
it should be an interesting day with the weather bomb forecasted :twisted:
Has Mudhog been treated to a new Dizzy?


Not yet, I have a Mallory Unilite Dizzy that I might look at fitting soon.

and

Yes Taz with a call at 6:15am was abit rough... it will keep :lol:

Ordered my new set of Silverstone MT-117 35/10.5 R16 Xtremes out of there new moulds, I'm hoping they are alittle bit taller than the old ones?
taz01
Tazzles
Posts: 1644
Joined: Sat Nov 25, 2006 12:00 pm
Location: Lower Hutt

Re: 3rd - 4th March 2012

Post by taz01 »

at work with list of stuff to do this weekend.....
little welding for canvas window/deck cover
sand/bog/paint rest of truck
put winch back together
finish rear bar start front bar
yep that enough.......oh somehow work around major flooding throughout the workshop :shock:
WARNING:
Insanity has replaced reason in the modification of this vehicle

you can follow me, but its gunna hurt
User avatar
mudlva
Hard Yaka
Posts: 2918
Joined: Mon Apr 16, 2007 12:00 pm
Location: fixing another cv!! dam lockers (Papakura)

Re: 3rd - 4th March 2012

Post by mudlva »

I flew to Wellywood yesterday to collect my new (old 1996) commy wagon and drive to back to Papakura. Yes a road trip :P . Was passing thru Plimmerton and saw a O.E tourist hitchhiking thought why not empty wagon and all, turned out to be a young lady from Germany :D and she has been in NZ for 7months. She didn’t know where to start for her OE and heard so much from her extended friends and family about NZ :D she decided to start here and is have a blast except for our crap summer weather :x . talking away and missed the SHway1 turn to Waiouru :oops: and found myself in Whanganui :oops: looked at map and as the las was heading to Hamilton to meet with friends I suggested that we head into the Naki area rather then the supper windy SHway4 option. all good but as we approached Patea a noise developed :? . sounded like exhaust mount loose, stop to investigate but could not find anything. carried on and as the noise disappeared thought no more it come back at Hawera so concluded it was something to do with slowing down to city speed limits and possibly coming from transmission :(
Stop again but all fluids were still all good etc and with no tools on board and with still 400+ ks to go carried on. In between yaking and what not the German las was talking to her mates and found that they were heading to New Plymouth on Monday to catch up with others who were already there. I mentioned the story about grey clouds with silver linings and said I was able to drop her off at Inglewood were its only a 10 minute ride thru to New Plymouth 8)
By this stage the noise was coming and going so I was on the phone to mates up home to maybe start out a Rescue Rohan Operation (RRO) :cry:
After saying fairwell to my traveling companion and good luck for the rest of her stay I started to concentrate on my own problems :x with the thought of having to transverse the Mt Messenger ranges and Awakino gorge infront of me :( . the noise was now only developing under hard excelaration so with gentle throttle I was able to get over the mount and onto Te Kuiti :) .
With many progress reports to my missus on how I was travelling, I limped back to Papakura. Just glad the RRO did not have to be engaged.
When I collected the car the tank was on empty and I filled it with 61ltrs of 91 gas.
I travel just under 700ks over a 9 hr straight drive and the tank needle is just above empty some where between E and 1/8th mark. With an average open road speed of 90 to 95 ks
Quick math is around 9ltrs per 100ks with isn’t too bad as I was expecting to travel at around 13 to 14ltrs per hundred, I must take into account it was all open road travelling and no city work but the figures are still looking impressive to me
Now I have to get her onto the hoist and find that noise
User avatar
coxsy
Hard Yaka
Posts: 5200
Joined: Tue Jun 20, 2006 12:00 pm
Location: mangere auckland

Re: 3rd - 4th March 2012

Post by coxsy »

Oh fun, now have no dash gauges or warning lights, wipers or indercators :(
89 safari, pto winch, 33x15 simexs. sliders,75mm lift . turbo intercoolered
User avatar
kbushnz
Hard Yaka
Posts: 2486
Joined: Wed Sep 16, 2009 9:03 am
Location: Massey, Auckland

Re: 3rd - 4th March 2012

Post by kbushnz »

coxsy wrote:Oh fun, now have no dash gauges or warning lights, wipers or indercators :(


You know how to fix it Coxsy
Need two people for this...
Drive it into your garage, pop bonnet and undo radiator cap.
Push Saf out and push in a Toyota...
Install Radiator cap and you are done.... :lol:

Auto is in and all bolted up, plumbing done....
Will fit transfercase later.... Promised to spend time with the family this avo....
As I am working on Sunday :?
Cheers Calvin
KZJ78 Landcruiser Prado...
User avatar
coxsy
Hard Yaka
Posts: 5200
Joined: Tue Jun 20, 2006 12:00 pm
Location: mangere auckland

Re: 3rd - 4th March 2012

Post by coxsy »

think i posted up before how i don't trust auto sparkies now :D
89 safari, pto winch, 33x15 simexs. sliders,75mm lift . turbo intercoolered
User avatar
Taz
Hard Yaka
Posts: 1330
Joined: Mon Apr 16, 2007 12:00 pm
Location: Queenstown
Contact:

Re: 3rd - 4th March 2012

Post by Taz »

coxsy wrote:Oh fun, now have no dash gauges or warning lights, wipers or indercators :(


Check the plug and wiring to your hazard light button.

kbushnz wrote:
You know how to fix it Coxsy
Need two people for this...
Drive it into your garage, pop bonnet and undo radiator cap.
Push Saf out and push in a Toyota...
Put on a frilly dress, eye liner and high heels.
Install Radiator cap and you are done.... :lol:
"Anyone who lives within their means suffers from a lack of imagination." - Oscar Wilde
Work in progress - www.pearls.kiwi
User avatar
Roenut
Hard Yaka
Posts: 151
Joined: Thu Jan 05, 2012 11:41 pm
Location: christchurch

Re: 3rd - 4th March 2012

Post by Roenut »

got rid of the surfs kumho SHOES, and whipped on some kumho GUMBOOTS.
nice muddy trip tommorrow me thinks :twisted:
Less Traction More Action!

previous vehicles - commodores, bmws, subarus, 1kz surf, d21 terrano.
ln60 surf, current - kzn130 surf
User avatar
Pedro
Hard Yaka
Posts: 902
Joined: Mon Dec 09, 2002 12:00 pm
Location: Wellington

Re: 3rd - 4th March 2012

Post by Pedro »

non 4wd but, finally kicked Vodafone into touch, gone to 2 degs, lets see if they are just as useless.....

pedro
User avatar
coxsy
Hard Yaka
Posts: 5200
Joined: Tue Jun 20, 2006 12:00 pm
Location: mangere auckland

Re: 3rd - 4th March 2012

Post by coxsy »

i like 2 degrees coverage isn't to hot sometimes, but cheaper for me
89 safari, pto winch, 33x15 simexs. sliders,75mm lift . turbo intercoolered
User avatar
chop
Bush Crasher
Posts: 67
Joined: Sat Feb 18, 2012 7:03 am
Location: shore

Re: 3rd - 4th March 2012

Post by chop »

thinkn i might head up muriwai/bombing range tomorrow;any takers?
Built not brought
User avatar
Filthy4x4
Hard Yaka
Posts: 1052
Joined: Mon Dec 20, 2010 2:51 pm
Location: KKK

Re: 3rd - 4th March 2012

Post by Filthy4x4 »

Another quiet weekend for me. Got bored and thought I would try get full flex out of the zuk, flatmates honda looked like a good spot :lol: ... It worked, but im not happy :roll: it needs alot of work.

Image

Image

Image

Image

Image
Image
027 MUD GEAR - (027 683 4327)

Check our facebook:
http://www.facebook.com/Filthy4x4

http://www.facebook.com/Filthymotorsportnz
User avatar
sibainmud
Hard Yaka
Posts: 1846
Joined: Sun Apr 04, 2010 9:27 am
Location: North Shore Auckland

Re: 3rd - 4th March 2012

Post by sibainmud »

uwshho wrote:Image


Wonder where that idea came from :?:

Picked up a front 4.8 diff. 4.6's are ok but had to use 1st gear more and 2nd gear less :x
Pulled the turbo off as it was under preforming. Only 3 broken studs to deal with :roll:
Still have to remove the intake manifold to clean out and a bit of porting to do to improve the flow of boost.
Looking forward to changing front diff and rear diff head (yeah right)

Cheers,
I keep looking for the loose nut behind the wheel, but I can't find it!!
User avatar
Filthy4x4
Hard Yaka
Posts: 1052
Joined: Mon Dec 20, 2010 2:51 pm
Location: KKK

Re: 3rd - 4th March 2012

Post by Filthy4x4 »

sibainmud wrote:
uwshho wrote:
Wonder where that idea came from :?:

Picked up a front 4.8 diff. 4.6's are ok but had to use 1st gear more and 2nd gear less :x
Pulled the turbo off as it was under preforming. Only 3 broken studs to deal with :roll:
Still have to remove the intake manifold to clean out and a bit of porting to do to improve the flow of boost.
Looking forward to changing front diff and rear diff head (yeah right)

Cheers,



:lol: It had to be done.

Sweeeet you'll be happy with that, do you still have all arms and legs attached?
Image
027 MUD GEAR - (027 683 4327)

Check our facebook:
http://www.facebook.com/Filthy4x4

http://www.facebook.com/Filthymotorsportnz
User avatar
Overkill
Hard Yaka
Posts: 294
Joined: Sun Sep 05, 2010 8:26 pm
Location: Paraparaumu

Re: 3rd - 4th March 2012

Post by Overkill »

Yesterday, wired up my roof lights and today went and picked up my new 140amp SCA Mig for a whopping $209 from the Upper Hutt store...NICE.... 8) :mrgreen:

Image
Image
wayfastwhitee
Hard Yaka
Posts: 115
Joined: Wed Jan 25, 2012 10:59 am
Location: Chch

Re: 3rd - 4th March 2012

Post by wayfastwhitee »

Overkill wrote: and picked up my new 140amp SCA Mig for a whopping $209 from the Upper Hutt store...NICE.... 8) :mrgreen:

Image


thats a crazy deal eh, repco have similar, been considering picking one up. tried it out yet?
User avatar
Overkill
Hard Yaka
Posts: 294
Joined: Sun Sep 05, 2010 8:26 pm
Location: Paraparaumu

Re: 3rd - 4th March 2012

Post by Overkill »

wayfastwhitee wrote:thats a crazy deal eh, repco have similar, been considering picking one up. tried it out yet?
Had a quick play tonight, more than happy with the unit for the price and using flux core 8)
Image
User avatar
chopdpatrol
Bush Crasher
Posts: 70
Joined: Mon Dec 06, 2010 9:17 pm

Re: 3rd - 4th March 2012

Post by chopdpatrol »

soo saturday was put patrol back together to start it and find out its pissing oil out the side of engine under manifold, so took the daily again

heres a deep river

http://www.facebook.com/photo.php?v=10150596032774514

&

heres the city passing threw haha
http://www.facebook.com/photo.php?v=10150596038439514
User avatar
Overkill
Hard Yaka
Posts: 294
Joined: Sun Sep 05, 2010 8:26 pm
Location: Paraparaumu

Re: 3rd - 4th March 2012

Post by Overkill »

chopdpatrol wrote:soo saturday was put patrol back together to start it and find out its pissing oil out the side of engine under manifold, so took the daily again

heres a deep river

http://www.facebook.com/photo.php?v=10150596032774514

&

heres the city passing threw haha
http://www.facebook.com/photo.php?v=10150596038439514
Can't view your facebook links :( Do not have permission.......
Image
User avatar
ladeda
Hard Yaka
Posts: 299
Joined: Wed Jan 04, 2012 9:59 pm
Location: East coast bays

Re: 3rd - 4th March 2012

Post by ladeda »

Well the weather bomb bought this over from the neighbours at like 1am... only cost me a couple of roof tiles

FILE0005.JPG


spent saturday making up and finding theese

FILE0016.JPG


with the help of my cheap welder picked up from Supper cheap managed to knock this up

FILE0023.JPG


put it under the spring and it did this

FILE0011.JPG


next weekend will be the left sides turn....
User avatar
T-Boon
Hard Yaka
Posts: 887
Joined: Mon Dec 22, 2008 10:59 am
Location: Auckland

Re: 3rd - 4th March 2012

Post by T-Boon »

Got the truck all finished to drop off to get the 1UZ wire`d, then he put me off a week because he`s too busy... Balls.

Oh, and bought a rotary convertable.

Taking Expressions of interest for boyfriends ... :S

http://img171.imageshack.us/img171/6937 ... d365fb.jpg

And may take up hairdressing.
To Boon or not to Boon.
jimichelle
Bush Crasher
Posts: 62
Joined: Tue Mar 31, 2009 11:30 am

Re: 3rd - 4th March 2012

Post by jimichelle »

Overkill wrote:Yesterday, wired up my roof lights and today went and picked up my new 140amp SCA Mig for a whopping $209 from the Upper Hutt store...NICE.... 8) :mrgreen:

Image

is that out of catalouge price? sca has them in chch for 650?
Post Reply

Return to “This weekends achievements”