Vibration at front end

For all topics related to Jeeps
Post Reply
User avatar
Nizsafari
Hard Yaka
Posts: 431
Joined: Thu Apr 26, 2007 12:00 pm
Location: In The Hutt

Vibration at front end

Post by Nizsafari »

Hi all,

I have a 95 Cherokee which has developed a vibration at the front end at around 80k, I replaced the drivers wheel hub/bearings as they were buggered but it hasn't fixed it.. I can feel the vibration through the steering, it is also really noisy!!, It doesn't appear to be the tyres as I cant hear it on the passenger side.. any ideas??

replace passenger side hub?
front driveshaft??

Cheers
User avatar
stinky
House Hubby
Posts: 949
Joined: Wed Nov 30, 2005 12:00 pm
Location: Wellington

Re: Vibration at front end

Post by stinky »

give you $500 for it dude :D
____________________________
Martin
http://www.wtbs.co.nz
User avatar
yeti
Bruiser
Posts: 1847
Joined: Thu Oct 11, 2007 12:00 pm
Location: kainga

Re: Vibration at front end

Post by yeti »

drop the front drive shaft and go for a drive......jack it up and see how much movement ya have in the other side hub....both can give ya a vibe
v8 tj...luvs the gas......
User avatar
kbjj
Sausage Shack
Posts: 712
Joined: Sat Apr 10, 2010 3:51 pm
Location: Rangiora

Re: Vibration at front end

Post by kbjj »

My thoughts... I've recently had 3 vehicles develope front end vibs, all have been tyre problems. Don't rule them out without proving it, try swapping them with rears maybe.
If you break it... build it stronger.
User avatar
Nizsafari
Hard Yaka
Posts: 431
Joined: Thu Apr 26, 2007 12:00 pm
Location: In The Hutt

Re: Vibration at front end

Post by Nizsafari »

Cheers guys, will tey all that over the weekend.. and Stinky.. you already know the answer to your comment :lol: :lol: :roll:
User avatar
luckyme
Hard Yaka
Posts: 178
Joined: Wed Apr 28, 2010 2:20 pm
Location: North Shore

Re: Vibration at front end

Post by luckyme »

User avatar
Mongoose
Hard Yaka
Posts: 378
Joined: Sun Oct 02, 2005 12:00 pm
Location: Christchurch-ish

Re: Vibration at front end

Post by Mongoose »

I love a bit of vibration at my front end...
XJCrawler
Hard Yaka
Posts: 209
Joined: Mon Mar 12, 2012 1:47 pm

Re: Vibration at front end

Post by XJCrawler »

renegadenz
Winch master
Posts: 13
Joined: Tue Sep 29, 2009 10:33 pm

Re: Vibration at front end

Post by renegadenz »

my xj developed the mean death wobble at that speed, i also noticed at the time that when i backed down my drive and off the kerb i could hear a clunk.

I researched the USA forums and it was suggested that it was the control arm bushes excessively worn.

I replaced the worn out lower control arm bushes and the clunking went and so did the wobble.

just my 2c
Post Reply

Return to “Jeep”