cruiser pto direction??????

[ski]

A while back I brought a PTO for my cruiser project, It turns out that it turns the wrong way for me,as the rope feeds in from the bottom unlike my other PTOs which all comes in from the top. So now it,s no good to me. Have you guys seen the rope come in from the bottom and what year of cruiser ?.Cheers.

[NJV6]

All cruiser ones go in over the top of the drum, electric & Pto, vs everything else which goes under.

[kbushnz]

What about buying a pto output unit for the transfercase that has fwd and rev in it.... And just run it backwards to the norm????
Not sure if the worm and gear has a stronger side.....
I am sure someone will advise...

[ski]

this is a cruiser pto,every thing is the same as my other 3,maybe of a 60 series?. got me guessing now,hopefully some one will know the answer. A 2 way pto gearbox would be goood tooo. Cheers.

[ski]

A forgot to mention that there is a shaft poking out each end,so can be driven from either side.

[mudlva]

i think you have a reversable pto unit

pull the pto off the box and see if there are two sprockets verse one sprocket on a std unit

now push and pull the engagement lever and turn the output shaft by hand and you will see the sprockets turning in opposite directions

the engagement lever will have three settings middle being neutral

lucky chap as the reversable units are getting hard to find now'a'days

[ski]

Hi I am talking about the drum direction not the pto gearbox ,shit that would be awesome ,maybe the drum mated up to a reversable gear box in a later life???/.Cheers.

[mudlva]

Ah right
Ok what brand of winch is it then
Any names or numbers would be good
I think may low mount pto driven ramsay winch feeds in from the bottom
If i remember i will have a look tomorrow in my "parts" shelf

[Sadam_Husain]

lucky chap as the reversable units are getting hard to find now'a'days

I used to have another one as well

[mudlva]

since we are discussing spares i have a few out back as well

ah the joy of playing with cruisers ah

[Sadam_Husain]

since we are discussing spares i have a few out back as well

ah the joy of playing with cruisers ah

go on post a pic you know you want to

[pruggerdore]

hi colin, clive here. hi have 2 cruiser 60 series winchs here, can look swap maybe. and a forward reverse drive unit and no you cant have it

[ski]

Hiya, thats ok,I will stick it on trademe.might be usefull to some one as the drum can placed higher on the front as the cable comes in from the bottom.If I had relised that the drums are different then I could have aloud for it. Shit happens.Back to my spear PTO. PLan dddddddddddddd. Cheers.

[NJV6]

Is it a Nissan or Mitsi one Ski?

[ski]

Toyota.

[Sadam_Husain]

these are the only factory toyots ptos I've seen and the cable feeds off the top of the drum, theres after market ones like thomas, gillies and ramsey etc that have been fitted to cruisers over the years but I dont know which direction the drums wind on those?

[ski]

Thats the same as mine,theres some letters stamped in the middle on the end flange, not sure what?.Cheers.

[Sadam_Husain]

are you sure the cables spooling off the bottom of the drum then, the only way it could be doing that is if you've got a forward/reverse pto instead of the standard single direction type?

[ski]

yep it is spooling in from the bottom, It came with the standard steel frame which bolts onto the front of the cruiser.My other 2 pto,s have only one shaft for driving as this one has a shaft on each side of the flange,so can be driven from either side . has a key way in the shaft.Maybe it was used on the rear of truck,which then would spool from the top/////.ONly guessing.

[Sadam_Husain]

I gave a PTO to Sig that had a shaft right through it that had front and rear output flanges, it was a forward reverse pto, are you sure you havent got a forward/reverse selectable pto, they have the twin gears in them like the two bottom ones in the pic, the top one has one gear and is a single directon pto

if you need a single direction pto I've got a couple here that I've only kept as spares, I use the forward/reverse ones

[ski]

HI all ,just pulled out the worm drive on the drum and it is left hand thread, as opposed to the normal right hand ,answers the question of why it spooled in from the bottom.Must have been made for a rear mounted truck.Will Still work on the front of truck if you wanted to spool in from bottom. Cheers.

[ski]

HI all does a 40 series cruiser pto spool in from the bottom of drum?????

[tow99]

My 40 spools from the top on a tomas winch