just putting a safari brake master cylinder on my terrano, (long story) and have a few questions with regards how the safari is piped.
from the brake master cylinder there is two pipes. it looks like they go down to splitter box with three coming out, so the question is.. one for front and other two for rear left and right ? or one front one rear and for some thing else ? or can i just run one front one rear and dont bother about spliter box.
safari brake lines.
Moderator: Mark
- passengerpete
- Hard Yaka
- Posts: 476
- Joined: Fri Jan 05, 2007 12:00 pm
- Location: christchurch
Re: safari brake lines.
I could be wrong here but if its like the Landcruiser ones, one line to front one to rear and one is a return line from Load Sensing Proportioning Valve at the back. Dont need it unless your running the valve.
Softroader VW Amarok nowadays.... 

Re: safari brake lines.
your correct on that 

89 safari, pto winch, 33x15 simexs. sliders,75mm lift . turbo intercoolered
- passengerpete
- Hard Yaka
- Posts: 476
- Joined: Fri Jan 05, 2007 12:00 pm
- Location: christchurch
Re: safari brake lines.
thanks guys very much appreciated.