hi all
hope someone can help me
where can i buy a brake pressure bleeder from in chch?
does anyone have 1 i could borrow this weekend for beer etc?
need to get brakes fully bleed for cert as the normal foot bleeding is not working
cheers john
brake pressure bleeder
- jonossiksilvia
- Hard Yaka
- Posts: 727
- Joined: Mon Jul 12, 2010 5:53 pm
- Location: christchurch
brake pressure bleeder
Current 4wd: Surf Kzn185 ssrg factory Intercooled (yet to start build)
Past 4wd: toyota surf ln130, coil sas, 1uz v8 build
Past 4wd: toyota surf ln130, coil sas, 1uz v8 build
Re: brake pressure bleeder
I just did mine with one of these. Had air stuck in lines due to fiddler brakes, once I pumped the foot brake and fidler at the same time I was impressed with how is sucked the air out off the lines.
http://www.trademe.co.nz/motors/car-par ... 199941.htm
http://www.trademe.co.nz/motors/car-par ... 199941.htm
Latest mod, pin stripes, hit the same branch I did on the way in on the way out.
ford ranger wildtract and sj.
ford ranger wildtract and sj.
- Sadam_Husain
- Angry bird
- Posts: 5164
- Joined: Mon Feb 20, 2006 12:00 pm
- Location: WELLINGTON
Re: brake pressure bleeder
when we stuck all the brake lines back in my truck a few months ago and bled it up from scratch Sig filled the master cylinder up with fluid and held the rubber cap on nice and tight with his hand and used the duster gun on the compressor to "gently" put positive pressure into the M/C through the vent hole in the cap, worked a treat and pushed fluid through the remote booster and right through the system 

Re: brake pressure bleeder
If your sneaky you can use a vaccum cleaner a glass bottle and a bleeder hose to draw the fluid through.
Re: brake pressure bleeder
At work we use one of these for reverse bleeding the clutch lines in the trucks. I've used it a couple times for my cars. works bloody well. It's got a length of vacuum tube to get the size.. the seals last longer than you might think, you get about 18months per sprayer.


---
- jonossiksilvia
- Hard Yaka
- Posts: 727
- Joined: Mon Jul 12, 2010 5:53 pm
- Location: christchurch
Re: brake pressure bleeder
Cheers guys.
After some research on google and youtube i Brought the kit 007 posted up. Hopefully it turns up by the weekend as paid for it yesterday.
Cheers guys
After some research on google and youtube i Brought the kit 007 posted up. Hopefully it turns up by the weekend as paid for it yesterday.
Cheers guys
Current 4wd: Surf Kzn185 ssrg factory Intercooled (yet to start build)
Past 4wd: toyota surf ln130, coil sas, 1uz v8 build
Past 4wd: toyota surf ln130, coil sas, 1uz v8 build