Safari PTO Winch cable. Size? Length?

For all Nissan related topics

Moderator: Mark

Post Reply
User avatar
PTO4WD
Driver/Navigator
Posts: 15
Joined: Tue Oct 17, 2006 12:00 pm
Location: Christchurch

Safari PTO Winch cable. Size? Length?

Post by PTO4WD »

OK, have read through all the posts but can't find the info.

What diameter winch rope should i get for my safari?

Does anyone have a figure on how many metres i can fit of that diameter on my safari pto?

Going to get steel and tube to make it for me, very cheap. Read H2OLOVA's post on cheap recovery gear, so i wont say much more.
User avatar
coxsy
Hard Yaka
Posts: 5200
Joined: Tue Jun 20, 2006 12:00 pm
Location: mangere auckland

winch cable

Post by coxsy »

hi I ve got 30 mtres on mine its 8mm five or six stand
cheers peter
User avatar
mudchuka
Hard Yaka
Posts: 271
Joined: Thu Feb 23, 2006 12:00 pm
Location: invercargill

Post by mudchuka »

i wouldnt go over 30m of 8mm steel rope or it may go over the edge of the drum and cause a nasty mess.

ive seen a drum be snapped off a winch when the rope goes over the edge and no ones watching.

you can carry a spare roll of winch rope and join them up make sure it has a loop to connect the hook to.
User avatar
DaveM
Hard Yaka
Posts: 3249
Joined: Tue Nov 02, 2004 12:00 pm
Location: Blenheim

Post by DaveM »

I run around 20-25m of cable from memory, for the exact reason mudchuka mentioed.

I also carry, 5,10,and 20m winch extension straps for longer pulls.
User avatar
PTO4WD
Driver/Navigator
Posts: 15
Joined: Tue Oct 17, 2006 12:00 pm
Location: Christchurch

Post by PTO4WD »

Thanks guys, now i can get one made up.

how does it connect to the winch drum? do i just need an eylet on the drum end to put a pin through?
User avatar
DaveM
Hard Yaka
Posts: 3249
Joined: Tue Nov 02, 2004 12:00 pm
Location: Blenheim

Post by DaveM »

should just need a small lug on the cable, and screw it to the drum itself.
User avatar
PTO4WD
Driver/Navigator
Posts: 15
Joined: Tue Oct 17, 2006 12:00 pm
Location: Christchurch

Post by PTO4WD »

cheers, think i will go with 2'' lift for now to save complications, means i can put $$ into other areas of the truck for now.
User avatar
DaveM
Hard Yaka
Posts: 3249
Joined: Tue Nov 02, 2004 12:00 pm
Location: Blenheim

Post by DaveM »

Probably the best way to go.
My 2" was in for 3mths, then went 3", soon to be 4" :roll: unless I find a GU in Japan in the next few weeks.
Post Reply

Return to “Nissan”