Power steer conversion

For all Suzuki related topics
Post Reply
tnr
Bush Crasher
Posts: 60
Joined: Sun Nov 06, 2011 12:58 pm

Power steer conversion

Post by tnr »

Wanting to convert my vitara to power hook. Has anyone done this do I need to change the steering colum and rack or just steer box and add pump and lines?
BlakeJ
Hard Yaka
Posts: 431
Joined: Wed Nov 02, 2011 6:06 pm
Location: CHCH / Wanganui

Re: Power steer conversion

Post by BlakeJ »

should be just the box pump and lines, where are you, i know where there is one in chch where you could get the stuff cheap as chips
tnr
Bush Crasher
Posts: 60
Joined: Sun Nov 06, 2011 12:58 pm

Re: Power steer conversion

Post by tnr »

Dam I'm in auckland
User avatar
Rotazuk
Hard Yaka
Posts: 937
Joined: Mon Jun 16, 2003 12:00 pm
Location: Auckland - New Zealand
Contact:

Re: Power steer conversion

Post by Rotazuk »

You will need the shaft up from the steering box also , the box is deeper , so to speak , in a ps box so the shaft is shorter .

Chris
tnr
Bush Crasher
Posts: 60
Joined: Sun Nov 06, 2011 12:58 pm

Re: Power steer conversion

Post by tnr »

Ok do you know how much different I have a body lift with steering spacer that I could reverse
User avatar
Rotazuk
Hard Yaka
Posts: 937
Joined: Mon Jun 16, 2003 12:00 pm
Location: Auckland - New Zealand
Contact:

Re: Power steer conversion

Post by Rotazuk »

It was a few years ago I did it , not much from memory so you may get away with it . I would like to say an inch but can recall sorry , only thing that makes me think its not much is the guys car it was spend about ten minutes trying to make it fit until I said to use the power steer shaft .

Chris
Post Reply

Return to “Suzuki”