(S39:8 HH 3 2 13) code on the ring gear
I need a replacement ring gear for the front diff of my nissan Terrano. I have found one its the right ratio 4.875 (witch is the frist part of the code) but the second part does not. What does the second part mean and is it important?
id ring gear please
id ring gear please
Last edited by poss682 on Sat Sep 15, 2012 3:31 pm, edited 1 time in total.
- Crash bandicoot
- Hard Yaka
- Posts: 2924
- Joined: Thu Dec 30, 2010 7:19 pm
- Location: Towing a hilux
Re: id ring gear please
Wow... I actually had to reread that to understand it with the spelling and grammar issues.
Ring gear.
Is that for the ABS?
Do you mean the Crown wheel inside the differential?
Ring gear on the oil pump?
Ring gear.
Is that for the ABS?
Do you mean the Crown wheel inside the differential?
Ring gear on the oil pump?
Waiter...there is a drought in my glass.
- Crash bandicoot
- Hard Yaka
- Posts: 2924
- Joined: Thu Dec 30, 2010 7:19 pm
- Location: Towing a hilux
Re: id ring gear please
Never mind, what year is your terrano and what engine and gearbox is in it.
I.E. 1993 2.7TD auto. in that order
I.E. 1993 2.7TD auto. in that order
Waiter...there is a drought in my glass.
- Crash bandicoot
- Hard Yaka
- Posts: 2924
- Joined: Thu Dec 30, 2010 7:19 pm
- Location: Towing a hilux
Re: id ring gear please
Its a 4.875 ( 9inch diameter). that much i can tell you from what you've typed, is it 11 bolt or 9 bolt housing? and are they 10mm studs or 12 mm studs?
Waiter...there is a drought in my glass.
Re: id ring gear please
sorry is that better, I believe its out of d21 nivara and i have a 94, auto,2.7
and also underneath the diff housing d21 1993 hg 4.8
and also underneath the diff housing d21 1993 hg 4.8
- Crash bandicoot
- Hard Yaka
- Posts: 2924
- Joined: Thu Dec 30, 2010 7:19 pm
- Location: Towing a hilux
Re: id ring gear please
your terrano's rear axle is most likely a H233B. A 4.625:1 ratio and 233mm diameter crown wheel with 31 spline axles. which means your front will be a R200 you can replace this with a LSD from a S13 nissan silvia/ or R32 skyline
HG48 is a 4.875:1 ratio you will need a C200 front diff (4.875:1 ratio obviously)to match that.
HG48 is a 4.875:1 ratio you will need a C200 front diff (4.875:1 ratio obviously)to match that.
Waiter...there is a drought in my glass.
Re: id ring gear please
so what do the other numbers mean (HH 3 2 13)
- Crash bandicoot
- Hard Yaka
- Posts: 2924
- Joined: Thu Dec 30, 2010 7:19 pm
- Location: Towing a hilux
Re: id ring gear please
foundry markings grade of metals used.
Waiter...there is a drought in my glass.
Re: id ring gear please
So HG48 is R200 front? ie late model D21 diesels had a 4.8 R200 front?
If so that is exactly what I'm looking for, hub to hub. That would save swapping 4.8 gears into a donor V6 R200 front.
I thought only the V6s got R200 front in 4.3 and 4.6... this is good news !!
If so that is exactly what I'm looking for, hub to hub. That would save swapping 4.8 gears into a donor V6 R200 front.
I thought only the V6s got R200 front in 4.3 and 4.6... this is good news !!
TOYOTA - The Official Vehicle of ISIS!
And makers of the '92 Camry, where you got your first backseat handjob.
And makers of the '92 Camry, where you got your first backseat handjob.
- Crash bandicoot
- Hard Yaka
- Posts: 2924
- Joined: Thu Dec 30, 2010 7:19 pm
- Location: Towing a hilux
Re: id ring gear please
lax2wlg wrote:So HG48 is R200 front? ie late model D21 diesels had a 4.8 R200 front?
If so that is exactly what I'm looking for, hub to hub. That would save swapping 4.8 gears into a donor V6 R200 front.
I thought only the V6s got R200 front in 4.3 and 4.6... this is good news !!
nope, ZD30 nivara has R200 4.8 so does my TD27eti mistral
Waiter...there is a drought in my glass.
Re: id ring gear please
And the Misty uses the D21 chassis aye? So an R200 from a Mistral would go straight into a D21 Terrano?
TOYOTA - The Official Vehicle of ISIS!
And makers of the '92 Camry, where you got your first backseat handjob.
And makers of the '92 Camry, where you got your first backseat handjob.