lights

[abbo]

Ha there . My bighorn is having a poo and the lights arent working on low beam...Use it sat nite they didnt come on so put on full and back to low and they fine...Now nothing...Checked all fuses and they are all fine...No wires come off...so bulb...
So if anyone could whats happening that would be good...I need it friday nite to pick up my son......
Thanks abbo

[sig]

sounds like the column switch is playing up .

[meatc]

x2 on the above. temp fix, get the CRC with the little white tube attached and spray the crap out of the bottom of the stalk and hope some rolls onto the contacts. Long term pull it out and have a look at the contacts, they may be dirty, bent or worn away.

Even shorter term fix, jiggle the swtich hi low hi low but once going leave on low cause no garentee they will go if you have to dip them from hi.

[Suza]

Mine dose that from time to time (usual only one side at a time) and I find a new bulb fixes it. The bulbs are a two part item so when the low beam part goes the high still works

[george.ene]

If the above suggestions fail. Pull out the multimeter and start some conituance testing.

[kbjj]

... conituance testing.

WTF

[4WDbits]

translation: continuity

[george.ene]

translation: continuity

Translation: brain fart on my behalf