Toyota Temp Gauge Mod

[bob_or_jim]

Thought I would add a link to the Temp Gauge Mod as on the Surf ASN site. Had a little trouble finding it so people may find it useful. Links for the parts required are below (grand total of $1)

Cheers

http://www.toyotasurf.asn.au/techsite/tempgauge.htm

http://www.jaycar.co.nz/productView.asp?ID=RR3276&keywords=120ohm&form=KEYWORD

http://www.jaycar.co.nz/productView.asp?ID=RR3268&keywords=56Ohm&form=KEYWORD

[sig]

thats good timimg .Did this mod to my 80 temp gauge a couple years ago and now i need to do my van gauge .saves me searching cheers

[tweake]

tho with a engines that are known to have overheating and head cracking issues i would throw out the stock temp gauge and go fit an aftermarket unit (i prefer digital as its easy to read exact numbers) with alarm output. that way you don't have to watch the temp gauge like a hawk.

[bob_or_jim]

Yeah both are easy to do, Im just not a fan of extra guages when there is 1 there already. Pyro is a good addition though. Its a bit like the hondas you see getting round with the monster tach. The 1 in the dash works just as good

A warning light is a good idea though, especially if other people use your vehicle as well.

[vvilly]

did you do this to the 185?

[bob_or_jim]

Not yet, was looking for the info to do it and thought ide post it up. Had the Prado (90 series) dash out today. Seems they work a little diff to the older dashs. With a little more playing round I should figure out how to do it though

[likemagic]

I have done it to a 185 - works well - found the thermostat was not closing causing slow warm up that was being hidden
picture here - stolen from else where
http://www.offroadexpress.co.nz/sites/www.offroadexpress.co.nz/files/imagecache/thumb/build_photos/Temp_Gage_Before%20KZN185_0.jpg

[SMOKEY]

bob_or_jim, I would like to do my 90# so would be interested in what, how and when, please share your findings with lots of tech to make it easy for a

OLDIE BUT GOODIE,

FITZY.

[bob_or_jim]

No worries mate, the surf site show 1 resistor and a diode to change, well my one has 2 resistors and a diode........will chat to someone in the know and get back to ya.

[imsohi]

good info to have cheers