Range Rover Axles and Suspension 4 Sale

[De-Ranged]

Having a shed clean out
Got 1 complete front axle, another front axle just missing the diff nugget and a rear housing that was done for compition (reinforced, extra set of brake posts for road legal fiddle brakes, guarded up brake lines)

Also got 2 sets of front radius arms and full set of rear suspension

Also got a couple of 4 speed manual box's with tranfercases, a carb'd 3.5 rover V8 and an LPG set up to run same motor

Offers

[De-Ranged]

Right scap'd one of the front housings pulled the diff out, its a course spline one

Also got a set of rear 2" lifted springs in good nick

[De-Ranged]

Right taken some pic's of the mod'd rear housing... would like to see this go to good home as it has a good bit of cool factor (would be a shame to throw it on the trailer as scrap)









It has had a couple of lengths of 6mm line pipe pushed inside (nice tight fit) the ends were welded, the diff head end got plated out into the pumpkin and plates welded either side of the out side of the pumpkin, the axle was then drilled and plug welded to join the line pipe to the housing
The diff cover was plated
An angle iron cover was made to protect the brake lines on the axle (I drove alot of logging cut over) and another set of brake posts have been added to run another set of calipers as fiddles

The axle will come with these calipers, brake lines and the housing.... no hubs or stubs I'm saving these for another trailer

Make an offer