Lockright Diff Lock SOLD
Lockright Diff Lock SOLD
Sold
Last edited by micahb on Sun Jun 09, 2013 10:51 am, edited 7 times in total.
Re: Lockright RG1620 Toyota 4 spider 8inch.
micahb wrote:Lockright 1620 Toyota 4 spider 8inch.
Got 2 going spare.
$500 if sold through ORE.
Otherwise more on trade me due to fees etc.
Will list if no interest here.
Out of curiosity, Will this fit hi pinion prado front diff??
0210481586
092333204
Micah.
No because the front gear is reverse cut you need a 1610
-----------------------
Who knew Prados could fly?
Who knew Prados could fly?
Re: Lockright RG1620 Toyota 4 spider 8inch.
wjw wrote:micahb wrote:Lockright 1620 Toyota 4 spider 8inch.
Got 2 going spare.
$500 if sold through ORE.
Otherwise more on trade me due to fees etc.
Will list if no interest here.
Out of curiosity, Will this fit hi pinion prado front diff??
0210481586
092333204
Micah.
No because the front gear is reverse cut you need a 1610
oh ok. thought that was only on the 80 series.
Cheers for that.
Re: Lockright RG1620 Toyota 4 spider 8inch.
8" reverse cut high pinion in front of prado's
-----------------------
Who knew Prados could fly?
Who knew Prados could fly?
Re: Lockright RG1620 Toyota 4 spider 8inch.
Double checked theor application guide, Key difference on the part numbers is that the front is 2 pinion, althought you can convert to 4 as I understand it and use a 1620
-----------------------
Who knew Prados could fly?
Who knew Prados could fly?
- IcedJohnno
- Trailer Trash
- Posts: 821
- Joined: Tue Oct 11, 2005 12:00 pm
- Location: Christchurch nr the hills
Re: Lockright RG1620 Toyota 4 spider 8inch.
Yeah, I've got a 1620 4 pinion in the front of mine.
To install you need an 8" 4 pinion diff carrier + some odd ball side thrust Timken bearings that are lower profile as they have a larger ID than the 2 pinion ones.
All from memory as I did it 9 years ago!
I recommend doing this as it is stronger and the 4 pinion LockRight has a smoother action than the 2 pinion one. I very rarely hear mine clicking, and only just feel it through the steering wheel.
To install you need an 8" 4 pinion diff carrier + some odd ball side thrust Timken bearings that are lower profile as they have a larger ID than the 2 pinion ones.
All from memory as I did it 9 years ago!
I recommend doing this as it is stronger and the 4 pinion LockRight has a smoother action than the 2 pinion one. I very rarely hear mine clicking, and only just feel it through the steering wheel.
-
- Bush Crasher
- Posts: 93
- Joined: Thu Dec 13, 2012 10:20 am
- Location: Tauranga
Re: Lockright RG1620 Toyota 4 spider 8inch.
Will these fit 1984 beam axle surf. 4.5 ratoo diffs. If they fit could b keen on both of them
Re: Lockright RG1620 Toyota 4 spider 8inch.
shity old hilux wrote:Will these fit 1984 beam axle surf. 4.5 ratoo diffs. If they fit could b keen on both of them
Dunno, whats your diff code? no idea what diffs you have on your wagon.
Re: Lockright RG1620 Toyota 4 spider 8inch.
shity old hilux wrote:Will these fit 1984 beam axle surf. 4.5 ratoo diffs. If they fit could b keen on both of them
http://richmondgear.com/powertrax/toyotalr.pdf
check out this link, might tell you if it fits.
-
- Bush Crasher
- Posts: 93
- Joined: Thu Dec 13, 2012 10:20 am
- Location: Tauranga
Re: Lockright RG1620 Toyota 4 spider 8inch For Sale
Where abouts in nz r u micahb?
Re: Lockright RG1620 Toyota 4 spider 8inch For Sale
Glen Murray, North Waikato. 40 Min south of Pukekohe.
30min norwest of Huntly.
Work in Huntly weekdays and sat.
0210481586
30min norwest of Huntly.
Work in Huntly weekdays and sat.
0210481586
Re: Lockright RG1620 Toyota 4 spider 8inch For Sale
Bump. top post.
Re: Lockright RG1620 Toyota 4 spider 8inch For Sale $450!!!!
Bump again. top post.
Re: Lockright RG1620 Toyota 4 spider 8inch For Sale $450!!!!
Bump. Top Post.