Failed WOF on Torque Rod loose at engine ? & spring bushes

[Toyota LN106]

Hi guys just got my 1st ever 4WD Toyota Hilux LN106

have a few things to sort for a wof , apart of getting the truck was to take a hands on approach to repairs.

laugh all you want but i have no idea what to tighten .... , can someone provide a link to an image of this rod and or instructions on how to tighten


also are shackle bushes and spring bushes the same thing ?
WOF says Front spring bushes and Rear Shackle bushes ?

Cheers

[Ralfie]

Probably your first step should be getting one of these ..........

www.trademe.co.nz/motors/car-parts-acce ... 180988.htm

[1hamish1]

Best thing you can do if your new to working on your vehicles is find a friendly mechanic who doesn't mind you being there with them as they do your wof. They can show you exactly what's wrong, were it is and give advice on repair. Makes life easy. I always watch my wofs.

[Toyota LN106]

Thanks yes i need to, i took it to a VTNZ
I wounder if this is a suitable Manual.. ?
http://www.hilux4x4.co.za/manual/

Is it this bar that the guy looks to be playing with ?
I typed in toyota torque bar into google images

http://images.google.com/search?hl=en&s ... B640%3B480

[hosehustler]

Yes thats the torque rod, goes from the top of your front diff to the chassis under the engine drivers side, it's job is to stop the diff housing rotating when you hit the brakes, if the torque rod is loose or worse removed, it creates steering pulling when braking.
The spring bushes and shackle bushes are all the same size and you can buy them as a set, if one or two are shot the rest will be on the way out so replace them all.
What part of the country are you?

[Toyota LN106]

Brilliant !!
That makes sense will dive under and have a look tonight.
I'm in Christchurch
Cheers for the advice i will replace the lot I have a quote from
http:\\lineside.co.nz of $50+ Gst

Any ideas how to get Moisture out of Headlights ?

[Dirtydog]

hair drier works if you take out the headlight part and poke it in there.

Had many problems with moisture in headlights.

[trucked]

The Hilux ute has sealed headlamps so ideally no moisture should be in there in the first place.

Getting it out may be quite tricky, possibly could take them out and stick in front of a de humidifier for a night, other wise you have to replace them being a sealed unit.

Ive sent you a pm about if you want a hand with any of the other stuff on your wof list, have quite a few spare spring bushes in the garage and ill teach you what to do.

[Taz]

Sounds a bit retarded typing it out but I throw my headlights in the oven on a low temp.

Ive sent you a pm about if you want a hand with any of the other stuff on your wof list, have quite a few spare spring bushes in the garage and ill teach you what to do.

What a good bastard

[Toyota LN106]

What a really Good bastard trucked

Wicked !!

and cheers all for the moisture suggestions , will take a look at that also !

[wjw]

hair drier works if you take out the headlight part and poke it in there.

Had many problems with moisture in headlights.

Just dont get it too hot or the lens will crack, dont ask how I know....

[surf lux]

Never hear of failing a wof for cracked alternator belts,
wouldn't have thought that would be a wof issue.
Interesting to see

[trucked]

because a diesel alternator does the vacuum as well. and if it fails it means crap brakes without vacuum assist.

[SupraLux]

The Hilux ute has sealed headlamps so ideally no moisture should be in there in the first place.

They often get replaced with semi-sealed units by people who want better light. While the semi-sealed ones let moisture in if you drown them, they can take 90/100W bulbs or higher instead of the standard 55/60W standard output (although the wiring should be upgraded as well when you do that).

It also makes bulb replacement much easier since you don't have to take the grille off and remove the whole unit.

The torque rod should be an easy fix, from memory its a 22 or 24mm bolt into a captive nut, so it should just need a few turns to tighten it - but as Hosehustler said, it stops brake-steer and if it comes off you will veer off the road every time you brake... I drove mine with the torque rod removed for a bit and its scary as hell braking at speed.

Steve

[Toyota LN106]

Cheers All , Went and seen Trucked today, Fantastic bloke !
Got the Bushes all done and learnt how to change them , also got the exhaust all welded up The torque rod sorted and got some great advice, even learnt how to drop the back seat down to find the jack HaHa
Tomorrows mission is to remove and oven the headlights..
Hope to take for Re inspection next Sat, after i get the belts on and bulb in the taillight.

[Toyota LN106]

PASSED WOF !

End of Thread

[on2it]

Cheers All , Went and seen Trucked today, Fantastic bloke !
Got the Bushes all done and learnt how to change them , also got the exhaust all welded up The torque rod sorted and got some great advice, even learnt how to drop the back seat down to find the jack HaHa
Tomorrows mission is to remove and oven the headlights..
Hope to take for Re inspection next Sat, after i get the belts on and bulb in the taillight.

sounds like a top bloke!

PASSED WOF !

End of Thread

Good end to this story!