Toyota Steering Arms

[arby92]

So I have a hilux diff in the front of the isuzu bighorn. I have had a problem twice now where I have bent the steering arm on the passengers side of the vehicle. Last year I bought a high steer kit and beefed up tie rods drag links etc. Unfortunately I didnt have the clearance to make it work so have beefed up drag link, tie rods, fj80 ball joints and a hydraulic arm attached to normal steering arms.

So the question is has anyone seen anything strong like the high steer arms that are flat or have the normal drop? I guess I could get some made up but would be bloody expensive

[suzolla]

Is this off road only or need to be road legal, affects what you can do.
Cheers
Tim

[arby92]

Time it is road legal at the moment and I would prefer it stayed that way as makes things logistically easier

[Madaz]

Is this off road only or need to be road legal, affects what you can do.
Cheers
Tim

That will be two sets you can sell

[suzolla]

Hi Tim,
Forgot if I rung you or not, heard back from LowRange, he can't get any blanks, said has been trying to get some for a year but the supplier won't sell. Will look at other options.
Can they be flat or do they need to be dropped.

If it was just for off road could just weld some up.

Cheers
Tim

[De-Ranged]

I've made a few flat ones now, its pretty cheap to do as its only one re-mount per arm to do the tie rod surface and hole
You should be looking 3hundy nothing more depends on the stock you cut them from, personally I prefer mild (pretty certain cert reqments are for mild)

Cheers Reece

[arby92]

Sweet will talk to a couple of machine shops around my area about making some up. Flat will be fine as long as the tie rod can sit underneath, I dont see any problem with that though as long as it can still move through its motion

[Madaz]

Hi Tim,
Forgot if I rung you or not, heard back from LowRange, he can't get any blanks, said has been trying to get some for a year but the supplier won't sell. Will look at other options.
Can they be flat or do they need to be dropped.

If it was just for off road could just weld some up.

Cheers
Tim

Yeah, they gonna have to have the same drop as factory arms, so it looks like i'll have to make some

[churchill]

I got some imported from the states that might do the trick. Pm me if your keen and I'll send you some pics.