Limits of a standard terrano...

For all Nissan related topics

Moderator: Mark

Post Reply
cowman
Driver/Navigator
Posts: 45
Joined: Thu May 31, 2012 8:27 pm
Location: Taumarunui

Limits of a standard terrano...

Post by cowman »

Hi guys,

Looking at setting up my terrano a bit better for mild off roading, hunting etc.

Its our only vehicle and I cant get too carried away (used to have a zuk that spent more time in the shed getting fixed after Id been off road than it did getting driven...)

What I was wondering is whether I could fit a set of 31" mud tires (spare set) without a suspension lift etc, would there be many problems? I was also thinking about getting one of those calmini idler arm braces, what do you think?

Id like to fit a couple of tow hooks and have enough stuff with me to do self recovery, was thinking a high lift jack/ winch kit just in case. On a side note - I have no front protection bar, anyone know where I could get a good steel one from? or how much It would cost to make?

Basicaly I want to be able to go out knowing that I can be resonably carefull and still have something that the wife can drive without getting fixed all the time :)

Cheers
1992 Nissan Terrano
User avatar
CLUMZ1
Hard Yaka
Posts: 800
Joined: Tue Jun 12, 2012 10:06 am
Location: Wellywood

Re: Limits of a standard terrano...

Post by CLUMZ1 »

put your location in your profile. http://www.offroadexpress.co.nz/Forums/ucp.php?i=164
Image
User avatar
sibainmud
Hard Yaka
Posts: 1846
Joined: Sun Apr 04, 2010 9:27 am
Location: North Shore Auckland

Re: Limits of a standard terrano...

Post by sibainmud »

31's no problem to fit without doing any lifts.
I have a Snake Racing (same as Calmini) idler brace complete with mount modification, for sale if you want it?
May have to get a front bar made as there are very few around on the second hand market.

Cheers,
I keep looking for the loose nut behind the wheel, but I can't find it!!
User avatar
Crash bandicoot
Hard Yaka
Posts: 2924
Joined: Thu Dec 30, 2010 7:19 pm
Location: Towing a hilux

Re: Limits of a standard terrano...

Post by Crash bandicoot »

what year etc is the terrano? and location? makes it easier to under stand what advice we should give you etc,
Waiter...there is a drought in my glass.
cowman
Driver/Navigator
Posts: 45
Joined: Thu May 31, 2012 8:27 pm
Location: Taumarunui

Re: Limits of a standard terrano...

Post by cowman »

sorry about that,

its a 1992 2.7 turbo and i'm from Taumarunui.

Any one got an idea what a front bar would cost to build? nothing flash no winch mount or anything, just to stop head lights and things getting dinged. and to mount some tow hooks.

whats the general view on those idler arm braces? worth while?
1992 Nissan Terrano
User avatar
Crash bandicoot
Hard Yaka
Posts: 2924
Joined: Thu Dec 30, 2010 7:19 pm
Location: Towing a hilux

Re: Limits of a standard terrano...

Post by Crash bandicoot »

first question.....does it have air bags.

If the answer is yes, then you will need to hunt down the older D22 nivara bull bar made by ARB or similar as these were mass produced and crash tested to ANZS standards in other words the new zealand government says they are safe to be fitted to a SRS vehicle on new zealand roads.

If no then you can pretty much fit anything you can get your hands on that suits the purpose.

The reason it is so hard to find off road gear for these as the NZ government takes most of its road regulations from the australians. and the mistral was never sold new there so the likes of big suppliers like ARB never made gear for them. they were sold new in europe and north america and south africa so look there (ebay etc) for parts

they are grey imports everywhere else and have no factory backing for parts supply etc, if you need parts tell your parts supplier to cross reference it with the navara as it was based on the same chassis
Waiter...there is a drought in my glass.
keithal
Hard Yaka
Posts: 388
Joined: Wed Apr 27, 2011 8:47 pm
Location: Christchurch

Re: Limits of a standard terrano...

Post by keithal »

Crash bandicoot wrote:first question.....does it have air bags.

If the answer is yes, then you will need to hunt down the older D22 nivara bull bar made by ARB or similar as these were mass produced and crash tested to ANZS standards in other words the new zealand government says they are safe to be fitted to a SRS vehicle on new zealand roads.

If no then you can pretty much fit anything you can get your hands on that suits the purpose.

The reason it is so hard to find off road gear for these as the NZ government takes most of its road regulations from the australians. and the mistral was never sold new there so the likes of big suppliers like ARB never made gear for them. they were sold new in europe and north america and south africa so look there (ebay etc) for parts

they are grey imports everywhere else and have no factory backing for parts supply etc, if you need parts tell your parts supplier to cross reference it with the navara as it was based on the same chassis

1992 terrano....
it aint a mistral so no airbags
User avatar
Crash bandicoot
Hard Yaka
Posts: 2924
Joined: Thu Dec 30, 2010 7:19 pm
Location: Towing a hilux

Re: Limits of a standard terrano...

Post by Crash bandicoot »

keithal wrote:
Crash bandicoot wrote:first question.....does it have air bags.

If the answer is yes, then you will need to hunt down the older D22 nivara bull bar made by ARB or similar as these were mass produced and crash tested to ANZS standards in other words the new zealand government says they are safe to be fitted to a SRS vehicle on new zealand roads.

If no then you can pretty much fit anything you can get your hands on that suits the purpose.

The reason it is so hard to find off road gear for these as the NZ government takes most of its road regulations from the australians. and the mistral was never sold new there so the likes of big suppliers like ARB never made gear for them. they were sold new in europe and north america and south africa so look there (ebay etc) for parts

they are grey imports everywhere else and have no factory backing for parts supply etc, if you need parts tell your parts supplier to cross reference it with the navara as it was based on the same chassis

1992 terrano....
it aint a mistral so no airbags


go hard as long as no forward protruding metal work has a radius of less then 6 ml it will pass a wof, use the oem chassi mounts if ya can
Waiter...there is a drought in my glass.
User avatar
DEATH_INC
Hard Yaka
Posts: 329
Joined: Tue Feb 06, 2007 12:00 pm
Location: Papatoetoe Auckland

Re: Limits of a standard terrano...

Post by DEATH_INC »

cowman wrote:
whats the general view on those idler arm braces? worth while?


If ya don't get sabian's one I can make these up for lots less than the calmini one's if ya want one.
They're a bit of a necessity if you wind the suspension up and go offroad, the idler doesn't like being pushed up by the steering....it bends fairly easy.
It is not too hard to make something yourself if you're handy with a welder....
User avatar
RJT
Hard Yaka
Posts: 245
Joined: Sun Jan 07, 2007 12:00 pm
Location: Christchurch

Re: Limits of a standard terrano...

Post by RJT »

Last week I got a set of 31/10.5 AT's on the standard rims on my '92 Terrano with no lift. Took it for a drive up a river on sunday and never got any rub at all front or rear :D . It was pretty tight at the rear though (not at full artic) so I've got a body lift waiting to go in sometime soon which will require cert but it means I can run my 31's and not put strain on the steering. Your 31's will fit no worries. An idler arm brace will be my next purchase as I've heard and seen that they are a must.
2008 R51, 2.5TD. 265/70R17 R/T's, 1.5" Rancho lift, Ironman snorkel and Deluxe winch bar, SCA 12,000lb winch and 9" LED spotlights, Kings awning, Alpinestar roof box, GME TX3100 UHF.
User avatar
Paulballz
Hard Yaka
Posts: 183
Joined: Mon Jul 25, 2011 3:01 pm
Location: Whanarei

Re: Limits of a standard terrano...

Post by Paulballz »

My terrano with 31inch maxxis on it rubbed when it had no lift and steering was turned (not full), even once i did 2inch suspension lift my front wheel still clipped the very front of the guard when turning sharp into driveways ect (slight compression) but that may of been due to my offset i was told it was the correct one but i dont believe it was as they stick out quite far...the torsion bars sag over time which you might want to just have a quick wind up and get wheel alignment done, also if your tyre sits out side the guard make some cheap flares up dont run the risk i did and i ended up getting green stickered
User avatar
lax2wlg
Hard Yaka
Posts: 1437
Joined: Sat May 12, 2012 8:33 pm
Location: Various areas

Re: Limits of a standard terrano...

Post by lax2wlg »

31" tyres were an OEM option on the SE model, you'll be able to fit 31" muds with no rubbing/no flares/no lift if you get some factory Lego alloys, they're 0 offset (search for an image).

The easiest way to prevent failure of front suspension components off road is to just leave it alone! Dont crank the torsion bars - At factory geometry it is very durable. Just make sure the CV boots are ok and grease everything up.

Idler arm brace is a good easy cheap mod, but if you are running 31's at standard height, and drive responsibly, you'll more than likely be ok.

If your truck is an automatic, get the trans cooler oil lines flushed out and thoroughly cleaned. They're not a shitty gearbox like everyone says - its just the cooling lines clog up over time and cause premature failure. Similar story with the manual trans.
TOYOTA - The Official Vehicle of ISIS!
And makers of the '92 Camry, where you got your first backseat handjob.
retep130
Winch master
Posts: 11
Joined: Mon May 06, 2013 9:01 pm

Re: Limits of a standard terrano...

Post by retep130 »

Just though I would dredge this up as I wouldnt mind getting a new set of rims and tyres for my new terrano, can someone tell me what I can do with a terrano with flares but not lifted at all? can I run larger than 31x10.5r15? can I run a wider rim? I am thinking of getting some D windows in 15x8 but not sure what offset

This car is my daily so most of the K's will be done on the road, but occasional offroad out at muriwai maybe a bit more around ruapehu. I have read that the Maxxis Buckshot is quite a good tyre, also the RT03 Hankook looks pretty cool

heres a pic of my truck off the auction

Image

I am pretty keen to run these rims

http://www.jegs.com/i/Cragar/260/342-58 ... ProductId=


edit: the Kuhmo KL71's look pretty sweet and are a reasonable price
Last edited by retep130 on Thu May 09, 2013 10:55 pm, edited 1 time in total.
User avatar
lax2wlg
Hard Yaka
Posts: 1437
Joined: Sat May 12, 2012 8:33 pm
Location: Various areas

Re: Limits of a standard terrano...

Post by lax2wlg »

Cool, a post '89 3-door, thats some sweet JDM sh%t!

If you went to 16" rims you may be able to run a 235/85 AT without any lift - thats 32x10.

Otherwise those brands Maxxis etc don't do a road friendly tall and skinny which the vehicle is suited to.

Some 31x10.5 BFG MTs (or a similar true 31") would fill the guards out nicely, bolt straight on.
TOYOTA - The Official Vehicle of ISIS!
And makers of the '92 Camry, where you got your first backseat handjob.
4by4
Driver/Navigator
Posts: 23
Joined: Thu Dec 04, 2008 12:30 pm
Location: Christchurch

Re: Limits of a standard terrano...

Post by 4by4 »

Limits of a standard terrano...


There are none, they are awesome enough just as they are, perfectly jizz-worthy.
Front ends are wicked, wiperblades are second to none, and cool smooth lines to boot..... why mess with perfection? (and all the cool kids drive em too)
User avatar
Dirtydog
Hard Yaka
Posts: 1788
Joined: Wed Jun 24, 2009 6:47 pm
Location: Gore, Southland

Re: Limits of a standard terrano...

Post by Dirtydog »

4by4 wrote:
Limits of a standard terrano...

and cool smooth lines to boot..... why mess with perfection? (and all the cool kids drive em too)


thats the water level mark, dont go any higher.... :mrgreen:
User avatar
lax2wlg
Hard Yaka
Posts: 1437
Joined: Sat May 12, 2012 8:33 pm
Location: Various areas

Re: Limits of a standard terrano...

Post by lax2wlg »

4by4 wrote:
Limits of a standard terrano...


There are none, they are awesome enough just as they are, perfectly jizz-worthy.
Front ends are wicked, wiperblades are second to none, and cool smooth lines to boot..... why mess with perfection? (and all the cool kids drive em too)


Image

Uh oh this guy may be pissy because he threw tens of thousands into a shiny modern vehicle that doesn't go as a well equipped WD21. Or Toyota 4Runner of the same vintage as a matter of fact - Check and Mate thankyou very much
TOYOTA - The Official Vehicle of ISIS!
And makers of the '92 Camry, where you got your first backseat handjob.
User avatar
Dirtydog
Hard Yaka
Posts: 1788
Joined: Wed Jun 24, 2009 6:47 pm
Location: Gore, Southland

Re: Limits of a standard terrano...

Post by Dirtydog »

just one of those things that you dont get till your a terrano owner eh?
wax
Hard Yaka
Posts: 510
Joined: Sat Nov 26, 2011 5:42 pm

Re: Limits of a standard terrano...

Post by wax »

Dirtydog wrote:just one of those things that you dont get till your a terrano owner eh?

LIKE
4by4
Driver/Navigator
Posts: 23
Joined: Thu Dec 04, 2008 12:30 pm
Location: Christchurch

Re: Limits of a standard terrano...

Post by 4by4 »

lax2wlg wrote:Uh oh this guy may be pissy because he threw tens of thousands into a shiny modern vehicle that doesn't go as a well equipped WD21. Or Toyota 4Runner of the same vintage as a matter of fact - Check and Mate thankyou very much



Image1)
By stating "a matter of fact" you imply that you actually have a "fact", which you don't have any of in your discourse. You only have guesswork or assumption, possibly reflected from your own transferred insecurities.
Image2)
As with the above "fact", "check and mate" can only be applied to the game of chess you think you may be playing. If the game is not chess, you're victorious closing statement is moot as the FACT is, there's no game of chess.
Image

And to clarify your (false) supposition, my three trucks are all of a minimum two decade vintage... there's a FACT for you.

Nothing wrong with Terranos or any other breed of carriage, if they're what tickle you then enjoy. They don't tickle me overly much.

As far as limits are concerned, Ive seen them go places I never thought they'd get near, then Ive seen them get stuck in a 6 inch hole. You know what the true limit is.........???? The driver.
User avatar
Dirtydog
Hard Yaka
Posts: 1788
Joined: Wed Jun 24, 2009 6:47 pm
Location: Gore, Southland

Re: Limits of a standard terrano...

Post by Dirtydog »

4by4 wrote:

As far as limits are concerned, Ive seen them go places I never thought they'd get near, then Ive seen them get stuck in a 6 inch hole. You know what the true limit is.........???? The driver.


That has got to be the biggest amount of truth there.

look at silbainmud and the places he goes compared to say... me?
wax
Hard Yaka
Posts: 510
Joined: Sat Nov 26, 2011 5:42 pm

Re: Limits of a standard terrano...

Post by wax »

Yeah Im not sure how simon get to some of those places and even more so back
zukmeista
Hard Yaka
Posts: 2380
Joined: Tue Aug 21, 2007 12:00 pm

Re: Limits of a standard terrano...

Post by zukmeista »

Dirtydog wrote:look at silbainmud and the places he goes compared to say... me?

That's 'cause his truck is finished and useable.
User avatar
lax2wlg
Hard Yaka
Posts: 1437
Joined: Sat May 12, 2012 8:33 pm
Location: Various areas

Re: Limits of a standard terrano...

Post by lax2wlg »

4by4 wrote:By stating "a matter of fact" you imply that you actually have a "fact", which you don't have any of in your discourse. You only have guesswork or assumption, possibly reflected from your own transferred insecurities.
Image2)
As with the above "fact", "check and mate" can only be applied to the game of chess you think you may be playing. If the game is not chess, you're victorious closing statement is moot as the FACT is, there's no game of chess.
Image

And to clarify your (false) supposition, my three trucks are all of a minimum two decade vintage... there's a FACT for you.


Now I have no idea what you are talking about, but please dont be one of those annoying internet warriors who uses numerical checklists and big words like its some sort of political debate. And please don't use the jerkoff emoticon back at me, I used it first! Find your own emoticon!
TOYOTA - The Official Vehicle of ISIS!
And makers of the '92 Camry, where you got your first backseat handjob.
User avatar
Dirtydog
Hard Yaka
Posts: 1788
Joined: Wed Jun 24, 2009 6:47 pm
Location: Gore, Southland

Re: Limits of a standard terrano...

Post by Dirtydog »

zukmeista wrote:
Dirtydog wrote:look at silbainmud and the places he goes compared to say... me?

That's 'cause his truck is finished and useable.


i was talking about my confidence, even when it was going i wouldnt dream of going places like that.
retep130
Winch master
Posts: 11
Joined: Mon May 06, 2013 9:01 pm

Re: Limits of a standard terrano...

Post by retep130 »

old internet politics huh

so wheres a good place to get some KL71's
wax
Hard Yaka
Posts: 510
Joined: Sat Nov 26, 2011 5:42 pm

Re: Limits of a standard terrano...

Post by wax »

Im out,
Post Reply

Return to “Nissan”