Trials truck to be parted out

[De-Ranged]

The Lada is up for sale, no one stepped forward so she is now getting parted out
I'll give it a week up here then I'll list stuff on retardme
If there is anything your interested in let me know

Lada Build Thread

Tyres - New 33" x 10.5" x 15" GT Savero's
Rims - Heavy wall ROH (old school & stronger) rims converted to external beadlocks, and hot galv dipped with 36 bolt rings and rated stainless cap screws

Rear Axle - Coil sprung rear surf axle striped and lada suspension fitted
Diff - 4.3 four spider open
Brakes - New vented IFS disks that have been machined and drilled (2.5kgs lighter than standard)
Calipers - V6 surf Calipers that have been narrowed to work with the above disks (over all gives the equivelent of 10 more hp at wheels), new pistons, seal kits and pads
25mm steel spacers
Rear Shocks - Standard used ones at the moment

Front Axle - Hilux solid axle fitted for coilover 3 link, New swivil housing kit, Clearanced to fit 75 series CV's, fitted with new 75 series CV's
Diff - 4.3 High pinion
Brakes New vented 40 series disks that have been machined and drilled etc
Calipers -V6 surf calipers, narrowed to fit with new pistons seals and pads
IFS hub swop with ali wheel spacers

Steering
Steering arms - Custom made "I" beam arms with 4130 seats for 80 series ball joints
Pitman arm - Custom made "I" beam etc
Tie Rod - Custom made Carbon hollow HD with new 80 series ball joints
Drag Link - Custom made carbon etc
Steering Box - Suzuki grand vitara
Steering Wheel - After market bling thing
Steering pump - Nissan Serrena

Motor - SR20DE, from a Nissan Serrena van 86,000 km's, cooling is from New alloy radiators either side up under bonnet with audi A4 cooling fans
Trans - Nissan U13 bluebird front wheel drive, center diff welded and stub axle conversion to run hilux drive flanges with bearing mounts

Suspension
Rear - standard lada coils
Front - New Rancho RS9000 12" travel shocks on custom Coilover conversion, New Heim joints through out

Cab
Seats - New Racepro seats (will never deal with these guys again, took over 6 months for them to supply these ) been modified with closed cell foam padding
Belts - 6 point harness's

Dash - New aftermarket, oil pressure, water temp & voltage

Body - lol well look for yourself cut clearanced fuckedwith and rebuilt, 6 point cage with multiple contact pads, space framed transmission tunnel and front engine bay with Unibody work on front guards
Complete weight estimated at 900-950kgs

Contact Reece
PM me here or 027 541 8794

[skid]

Be patient sir

I will win lotto one day

[De-Ranged]

I know you have 5 more weeks to win lotto but I'm not one to piss around when I get going

Right update wheel spacers are gone

[Del Fuego]

"at that point all bits that haven't had a fair offer will be toss'd into scrap"

Will pay ya scrap value for any leftovers lol

[ladeda]

Crying shame this is
I was so looking forward to seeing it in action one day.

[De-Ranged]

"at that point all bits that haven't had a fair offer will be toss'd into scrap"

Will pay ya scrap value for any leftovers lol

No problem, that will be insize rate as I'll sqaush everything down to size with my digger

Is a bit of shame, but its the way the cookie crumbles my buzz is building them so I've had my fun

[Del Fuego]

Yeah just being a cheeky s#!t really haha, hopefully everything sells... a bunch of cool stuff on this beast/shame it isn't selling complete actually... would have been a monster!

But still.. circumstances are what they are

[De-Ranged]

Right sick of silly offers on parts honestly if thats what its worth I can't be bothered
So I'm pulling the wheels off her and she will be going on trademe for a $1 when I get back from Costa

There ya go bargin hunters eat ya hearts out