has anyone a chassis drawing for a 91 terreno 2.7d

[philip121]

has anyone got this they can post on here
all running gear with out cab

[nizute]

i can put up a photo if you want i have the body off mine because i am wrecking it, if you want a photo just let me know what angle you want or a particular part of the chassis.

[yeti]

has anyone got this they can post on here
all running gear with out cab

[andy3542]

^^ Gold!

[mikeyt1689]

has anyone got this they can post on here
all running gear with out cab

CLASSIC

[philip121]

these can be found in swimming pools
they call it a brown out

[mikeyt1689]

these can be found in swimming pools
they call it a brown out

generally people dont swim in toilets but what ever you are into

[philip121]

you have to live mate try new things

[philip121]

any pics would be great of a chasses
only with all the running gear
thinking of shortening my truck

[BogBoy]

any pics would be great of a chasses
only with all the running gear
thinking of shortening my truck

[TJ]

any pics would be great of a chasses
only with all the running gear
thinking of shortening my truck

Shortening a Terrano? Just think it through in your mind first.

[mylux]

any pics would be great of a chasses
only with all the running gear
thinking of shortening my truck

What partictular step were you looking for?
Ballroom.
A number of specific dance variations in the International Style ballroom dances are named "chasse".

Tipple Chasse
Scatter Chasse.
Promenade Chasse (Chasse from Promenade Position)
Progressive Chasse
Right Chasse (Progressive Chasse to the Right)
Turning Chasse
Cross Chasse with a cat
Tipsy Chasse, also called simply Tipsy
Diagonal Chasse
Chasse Roll
Chasse Turn
Quick Chasse, a chasse done on count q&q, rather than qqS
Chasse Reverse Tun
Chasses to Right and Left
The Chasse Cape

[philip121]

short chassey shorten

[sibainmud]

CHASSIS
AUTO
MANUAL

[LOLYF]

CHASSIS
AUTO
MANUAL

You forgot TERRANO

[sibainmud]

CHASSIS
AUTO
MANUAL

You forgot TERRANO

[Jerry]

Maybe you could try on something small ... eg a go kart or something first

[LOLYF]

Maybe you could try on something small ... eg a go kart or something first

Flashback to 86surf

[nizute]

You could go as far back as the bar the shocks are mounted on but you would have to relocate the fuel tank and mod your body a lot!!
Its up to you but that's a lot of work, how serious are you wanting to get?

[madlux]

Chop it in the middle bro

[TJ]

Chop it in the middle bro

Do you mean lengthwise? That would make it narrower too....

[philip121]

yes but if I chop in the middle will on the running gear tranferbox etc fit or have to be removed
I know the rear drive sharft has to be shortened but hows all the other stuff going to go

[CLUMZ1]

CHASSIS
AUTO
MANUAL

You forgot TERRENO

FTFY.

[rotordogg]

yes but if I chop in the middle will on the running gear tranferbox etc fit or have to be removed
I know the rear drive sharft has to be shortened but hows all the other stuff going to go

park your truck on driveway, grab a beer (If your old enough to drink ), get under your truck with a tape measure, have a look at what your wanting to cut and where things can go if your wanting to move them.

Anything is possible with a big enough grinder and a beer inspired planning session.

[slide]

Hey Phil, if an auto to manual conversion is to difficult for you, you gunna need plenty of beers to even think about shortening a terrano! Go buy a couple dozen and an angle grinder. You'll either be the type and end up with a short wagon, or you'll just end up with a hangover..
Of course if beer isn't your thing- bourbon, vodka etc, any alcohol will do

Ps- when typing a post, that little red wiggly line under some words mean that that word has been spelt incorrectly. Makes spelling checking so much easier, even for the illiterate
Which makes it so much easier to read for all, especially the illiterate!

[CLUMZ1]

Makes spelling checking so much easier, even for the illiterate
Which makes it so much easier to read for all, especially the illiterate!

[mikeyt1689]

yes but if I chop in the middle will on the running gear tranferbox etc fit or have to be removed
I know the rear drive sharft has to be shortened but hows all the other stuff going to go

park your truck on driveway, grab a beer (If your old enough to drink ), get under your truck with a tape measure, have a look at what your wanting to cut and where things can go if your wanting to move them.

Anything is possible with a big enough grinder and a beer inspired planning session.

BEER INSPIRED PLANNING SESSION??? please tell me of other types never heard of any other way...

[rotordogg]

BEER INSPIRED PLANNING SESSION??? please tell me of other types never heard of any other way...

Simple, Not allowed to drink during work hours, so work time planning sessions are beer free.

Hence the things we come up with at work are not as out-there as plan's made outside work hours.

[NJV6]

yes but if I chop in the middle will on the running gear tranferbox etc fit or have to be removed
I know the rear drive sharft has to be shortened but hows all the other stuff going to go

Just shorten the tranferbox when you shorten the chassis - there is usually a gap between the tranferbox and the outo which is where i'd shorten it.

[ant-neil]

I'd prob get a 2door mistral and use its shorter drive shaft to decide length so it's a stock part and easy replacement or just start with a mistral then build up But there are stronger base platforms to start from .But am all for different and new projects as they bring out new ideas . V6 mistrals the right model use 300zx boxes which are alot stronger just something else to think about