Show us your Nissan

[travis2ninja]

Thanks,
Yeah iv'e been doing a bit of DSLR photography since the beginning of 2012.
www.travisszylak.com

[Joopa]

New toy was out for the first time this Saturday.



No mods whatsoever at the moment but who knows what's going to happen in the future.

[coxsy]

oh, can point out sliders,front bumber, rear bumber. quarter cut

[CLUMZ1]

Thanks,
Yeah iv'e been doing a bit of DSLR photography since the beginning of 2012.
http://www.travisszylak.com

slowest website load time ever, closed it after 40 seconds of waiting. What host are you using?

[DaveM]

Thanks,
Yeah iv'e been doing a bit of DSLR photography since the beginning of 2012.
http://www.travisszylak.com

slowest website load time ever, closed it after 40 seconds of waiting. What host are you using?

Been fine for me, no delays.

[travis2ninja]

000webhost.. It's Free, But i have no problems with load speeds, Everything loads instantly.
Also went out in the Redmond State Forrest on the weekend. Deep ruts which i have no clearance for, and bloody clay kept making me slide into them! :\

[glued]

heres my pig having a rest after a bit too much fun on my property.

[coxsy]

its better for your trucks survival if you don't lay it on its side,

[BogBoy]

Thanks,
Yeah iv'e been doing a bit of DSLR photography since the beginning of 2012.
http://www.travisszylak.com

Nice site!!!

I am learning how to build them at the moment

[Camfitz30]

My D21 terrano started on the mods

[badnuz]

well i never thought i would post in here, but seeing as i've started a new life in Aus thought i may as well try something different!

specs:

4.2TD manual
front and rear bars (dual wheel carrier rear)
dual battery
inverter
2 inch lift
drawer system and fridge slide
3 inch exhaust (gotta get rid of muffler thou too quiet)

upgrades to come (and soon, lets be honest, working for ARB here i gotta have some cool stuff)

3 inch OME lift (with panhards and adj arms )
ARB Sahara bar (TBC)
custom rock sliders
35 inch tahs
lockers
ARB Intensity LED lights (on order - woot!!)
big intercooler
Dump pipe and tune
Millweld Stainless snorkel (cause they are fawking cool)
winch

that'll probably do it for starters

[badnuz]

so i have started the mods!

so far:

ARB Roof rack
OME lift (3 inch)
ARB on board compressor
ARB LED Intensity driving lights
315/75r16 mickey thompson Claw TTCs
3 inch Mandrel bent exhuast
tidied up some wiring etc

next is :
diff breathers (replace the std ones with bigger hose etc)
fit new bucket seats
F/R ARB lockers
new winch and winch bar
rocksliders

then:

Millweld Stainless snorkel
Millweld Stainless airbox
BIG intercooler with fan
tune on pump/boost.

should have that all done in next 3 months (well, thats the plan!!)

as it now looks:

[sublimenz]

My latest terrano.
Brought it a couple of weeks ago fully certed for the ute conversion.
just need to do the finishing.

[2Diffs2Deep]

A pic of my safari

[CLUMZ1]

diggin the snorkel setup, is that a tomsoffroad job?

[2Diffs2Deep]

Yip sure is done a custom air box as well

[passengerpete]

my 91 terrano

[Twodiffs]

Think we passed that truck today on the way from Pines Beach to Rangaz.

[passengerpete]

most likely was out watching the rally.

[hamboy]

Good to see its out getting some use, hope its all working well

[RJT]

Update time. A few extras now. Body lift, 265/75R16 Hankook RT03s on 16/7 rims, snorkel and new (to me) front bar. Setting it up for a bit of touring and getting to the better fishing spots. Roof cage and modifications to the swing away tyre carrier to come.

[oljamesyboy]

good to see that bar getting some use

[snatch22]

my 91 terrano

hi what front end have you got in it?

[keithal]

my 91 terrano

hi what front end have you got in it?

http://www.offroadexpress.co.nz/Forums/ ... hp?t=27407
this is his build thread

[RJT]

good to see that bar getting some use

It's defo seen some bush time! Turns out body lift was required to fit it. Luckily I was fitting one anyway for the new tyres. Nice and solid, and looks good I reckon.

[oljamesyboy]

good to see that bar getting some use

It's defo seen some bush time! Turns out body lift was required to fit it. Luckily I was fitting one anyway for the new tyres. Nice and solid, and looks good I reckon.

yea i wasn't to sure if it was like i said to you but saves you modding it for body lift. truck definitely looks good tho

[snatch22]

1969 Patrol. Softtop G60 converted to ute.

awesome old girl...I have got a 82ish model patrol with the 4 litre petrol and are trying to find another 4 litre motor but they are getting pretty rare now

[timmay556]

Proud new member of the nissan club.


SWB GQ Patrol Manual - NZ New 184 Genuine Kms

[Jerry]

not sure where this is from but

[Hamz]

hah!, awesome