Show us your Toyota

[Mud Camper]

Small Block Chev, fabricated camper body 50% done

DSCF2746.JPG

removable camper unit??

I messed around with the removeable idea and then decided the compromises were too great for camping use and modded the chassis to suit. All the interior bits have arrived this week, so the fit out begins!

[bob_or_jim]

Ok so here goes. This is my '89 surf with a 1uz under it lid. Has a SAS front with coils etc out of a prado. Air con compressor setup with a 25 litre tank under the floor. Sits on 33's for the road and Simexs for the mud as seen here http://www.youtube.com/watch?v=L181v9f9qFM. For a winch bar I took the factory bumber off and filled it with steel work in behind it and have made the winch sit flush to make it a little tidier up front.

The poor ol truck is being replaced with a KZN185 shape surf so Im sure that build will be on here for all to see.

Cheers

[GNTONC]

nothing fancy so far, just a standard 1995 KN130 Smurf with a snorkel and a winch... (fotos taken on our trip 2 years ago thru the back country)

[pradon35s]

my shiter..

[WRNGLR]

Sold the TJ and am now gettin to grips with this wee beasty





cheers
Greg

[mack]

shit that's a tidy truck mate

[WRNGLR]

cheers dude, only had it since 5th July, 2.7 petrol, 2inch suspension lift , 2inch body lift, on 33s, I quite like it actually, but don't tell the missus, I'm still giving her shit for makin me sell my Wrangler.

Have just yesterday made up a bash plate for the front, pics to come soon and got a guy makin up a stainless rollbar for the tray.

[imsohi]

cheers dude, only had it since 5th July, 2.7 petrol, 2inch suspension lift , 2inch body lift, on 33s, I quite like it actually, but don't tell the missus, I'm still giving her shit for makin me sell my Wrangler.

Have just yesterday made up a bash plate for the front, pics to come soon and got a guy makin up a stainless rollbar for the tray.

Did you buy this off Mehrts??? if so will be a good little wagon

[WRNGLR]

Myles in Waimate was the previous owner, needed a few things doing to it as I found out when I got home ,, but all good now

[a80crewza]

My 80. Had it for a few months now. A lot of you will probably know this truck

[WRNGLR]

cheers dude, only had it since 5th July, 2.7 petrol, 2inch suspension lift , 2inch body lift, on 33s, I quite like it actually, but don't tell the missus, I'm still giving her shit for makin me sell my Wrangler.

Have just yesterday made up a bash plate for the front, pics to come soon and got a guy makin up a stainless rollbar for the tray.

Bash plate protecting the vacuum lines etc to front diff

[dratsum]

My baby.. had her for about 2 months now

When I bought it

[toysurf1]

heres my yota been a work in progress last year or so running 5l+t sas all the other fruit cant wait to take it out and get it dirty!!

[Mehrts]

Did you buy this off Mehrts??? if so will be a good little wagon

Yea mate, that's my old beast. The young guy Myles only had it a couple of weeks before passing it on. I sold it in April.

[Filmz64]

'91 VX 80 Series

Airlockers
Superwinch
Lightforce spots
4" Suspension lift, 2" body lift
36" SIMEX (35" Bighorns for soft trips)

[The WEHI]

'91 VX 80 Series

Airlockers
Superwinch
Lightforce spots
4" Suspension lift, 2" body lift
36" SIMEX (35" Bighorns for soft trips)

Looks good on the simexs

[The WEHI]

Ill play the game





Thats my Pos

[oljamesyboy]

forgot one jordan

[The WEHI]

yeah thats my boat.

[Filmz64]

'91 VX 80 Series

Airlockers
Superwinch
Lightforce spots
4" Suspension lift, 2" body lift
36" SIMEX (35" Bighorns for soft trips)

Looks good on the simexs

Yeah mate and goes good too. Terrible on the road though

[Filmz64]

Ill play the game





Thats my Pos

Looking good mate, missed you guys at Lake Daniells.

[allmud]

my 95 3ltr prado
std as at the moment
looking for some 2inch lift springs a snorkel and some 33s

[Scobby12]

My bj41 just put new springs in

[oljamesyboy]

had for few weeks now.

now siting on 33" big horns with 15 x 8 black rims.

[WRNGLR]

Update on the Hilux, have now put rear flares on well side and painted all flares black, and got tuff box for the back, side bars from Tom still to go on and stainless roll bar in the process of being made. oh and modified trans cross member from Merhtz to go on also




cheers
Greg

[J_Dub]

^^^ nice that would be my truck of choice with the 3rz when money allows

[WRNGLR]

^^^ nice that would be my truck of choice with the 3rz when money allows

cheers mate , yeah I'm fairly happy with it, goes really well, but have just had to put it into Toyota to have front end completely rebuilt, someone has used miss matched second hand parts ( part numbers don't match toyota data base for vehicle) and a few corners have been cut. Any way long story short $$$$$$$$$$$ to put right again.

Someone must have known when he sold it to me I reckon ( NOT MEHRTS )

[Mehrts]

If I knew about it, I would have bloody told ya!!

Or it wouldn't have left my hands like it.

If you decide you've had enough of it, you can always donate it back to me. Ta.

[WRNGLR]

Yeah I know you would have mate, I'm thinking it got a bit of a thrash between leaving you and getting to me to be honest.
And no ya can't have it back , especially not after I just spent my kids inheritance on fixing it, they won't be able to look after me in my old age now, off to the glue factory it is

[dsignal]

heres mine