The navara terrano morph

[Jerry]

http://nissan.epc-data.com/

A site like toyodiy.com but nissan (nissan parts catalogue)

and another one
http://www.nissanpartszone.com/

[wax]

I need a rear rhs wing mirror, but I want the solid terrano ones not the d21 sail style

[Dirtydog]

Its a bummer it cost soo much to ship, i think i know where one is for cheap.

[wax]

Thanks I will keep looking over here

[wax]

Well more work done on the truck.
It has the big box in it now so now I can really get up with out having to worry about the box exploding.
I have rebuilt the 12mm pump and ported the lift pump to allow greater flow out of it. I'm really looking forward to getting this big engine in there and throwing sand around on the beach.

[wax]

I need a td27 conrod if anyone out there has one. The bd30 I am rebuilding has a bent one

[slide]

td27 t conrod? I believe piston pin diameter is different between n/a and turbo

[wax]

Yes your right the the td27t has a 30 mm rod which I'm after

[wax]

Been doing some porting. I hate doing cast iron heads alloy is so much easier. But I want this little bd to go better than most.

[slide]

Bugger. Could have helped with a n/a conrod.
Very shiny! What you use to do that? dosen't look like the work of a burr wheel?

[wax]

Catridge roll, and wd40
It works very well, not what I normally do but its not normally a diesel so I only have air in there and dont have to worry abut drop out

[Hamz]

awesome build dude, hey quick off topic question, what is regulations in auz like for modifying your vehicle for your guys registration? I'm moving over soon, and looking at getting a terrano/pathfinder

cheers

Hamz

[wax]

Hey mate. Its the same over here they are after you to tax you as much as they can. But as long as you are sensible they will leave you alone. Since I put the big rubber guards on my truck they have left me alone.

[wax]

Where are you planning on moving to

[Hamz]

Moving to Perth bro

[sibainmud]

I need a td27 conrod if anyone out there has one. The bd30 I am rebuilding has a bent one

I had a search of TD Power's shed and found only 1 TD27t rod. But I was able to compare them to a TD41 con rod. Big end the same size and the pin diameter was the same with the same overall lenght, only more casting on the main shank. I would go for a full set of those as would be easier to source. I do have the one rod here if you want me to send? Couldn't find any cams though

Cheers,

[wax]

Thanks simion I didnt see this post only the one before as I dont get email updates. Sorry to have mucked you around on that as I already found a conrod. Can I offer you a exhaust manifold to fit your vgt turbo for your troubles the one I made I will not be using.

[wax]

I know Its been quiet on here regarding my build as I have been busy doing other stuff and I didnt want to start my bd30 big time until I had sold the qd32. well thats been sold and so its on to the bd30 except ::
I was on gum tree and saw a qd32 turbo on sale. blown engine but aftermarket turbo kit.
it was only 400 and so I picked it up, I actually think its only a head gasket thats blown but i have sold the engine anyway.

Im going to run this on my td27 until the bd30 is finished and then put that in the truck. The engine came with a great fan as well and qd32 fans in good condition are hard to come by so that was a bonus as well

[wax]

Some more of the turbo off the engine its actually the easiest manifold to work on you can get to all but two of the bolts with a socket

[wax]

Well I put the turbo on and it was a great things so much better. Then the cops were started to giving me heat about the large tyres and lift so I sold it and bought this

[wax]

Im thinking a new build thread

[Hamz]

did you hold onto the BD30?

[wax]

Yes its sitting in my garage

[goktu]

that's what I am searching for:)

awesome!


how's you project going?!

[Bravo]

Hello
I' m from Portugal and have a k260 With a bd30 engine, MY td27 that came With MY patrol break and i put a cabstar on it.
I've been cheking a qd32 and wondered what could be best keeping this bd30 that is a bit limited or switch to a qd32. I don't know this engine and wanted to ask you what is your opinion regarding both.
Should i invest. in bd30 or switch to a qd32efi switching fuel pump and i dont know if MY gearbox(td27) fitas the qd32 engine like bd30 in this case was easy just tale One out. and put the other in.
Thanks