rear pan hard rod y60 swb vs lwb

[Ashohman]

Hey guys

Heres my question.

Is the Swb rear pan hard rod the same as the lwb

Mates got a SWB saf y60 problem is the pan hard rod is bent, Have straightened it but its not perfect but has a LWB for parts with a good rod so wondering if they are the same and we could just swap them over.

otherwise will have to rig something up as were entered into manukau winch comp.

[sibainmud]

Weld 50x50x3-5mm angle to it as a strong back. Problem is then, rather than bend panhard something else will
One would think they are the same. Could always put them side by side to check

Cheers,

[Ashohman]

yes there's an idea only problem is getting the one off the LWB as one nut is @#$*ed. oh well one can only try I guess just stabbing in the dark you never know who you'll hit with some information.

[sibainmud]

Split the nut
If you want to preserve the threads, cut with grinder nearly through and then hit with a cold chisel (controlled destruction).

Cheers,

[mudtroll]

Panhards the same SWB/LWB