4wd mitsi pajero indicator

jiggy · Post by **jiggy** » Wed Dec 06, 2006 3:52 pm

Need help from the experts!!! my pajero is 1993 v6 3000c petrol. wot happen is, i sent it to have my auto transmission service done. when i came back home, i realize that the 4wd indicator (between the RPM meter / speed meter are)- showing the 4 tyres arent light on properly. when i use 2WD, the one on the right hand side at the back wouldnt light on whilst the left one is on. when i put on 4wd, both front tyres light on. i do not feel any different from normal... is it just something electrical or something that i need to be worried about???? any idea where to look for it?

mytronic · Post by **mytronic** » Wed Dec 06, 2006 6:09 pm

Hi

Was it indicating correctly before the trans was serviced?
If so take it back, they have connected the wires incorrectly.
The indicators to my knowledge are only that, 4WD is all mechanical

Cheers Mike

matwelli · Post by **matwelli** » Wed Dec 06, 2006 8:59 pm

sounds like a blowen indicator lamp on the righer rear indicator - replace the lamp.

jiggy · Post by **jiggy** » Thu Dec 07, 2006 6:04 am

heya,
thanks guys. i have checked for the indicator, reverse light, but none is blown.....

NJV6 · Post by **NJV6** » Thu Dec 07, 2006 8:55 pm

Sounds like it can only be a bulb as matwelli suggested. Common to blow and easy to replace.

If you put it in 4WD and not notice anything different from normal - that is normal as it is designed to run as full time 4WD.