Ford courier 2006 rattle

A place where Useful information on makes of 4wd is stored by Tech Authors.

Moderators: Steve_t647, Tech Authors

Post Reply
Rotax
Winch master
Posts: 7
Joined: Sat Nov 02, 2013 9:24 am

Ford courier 2006 rattle

Post by Rotax »

Hi

I recently purchased a ford courier 2.5 diesel turbo and it has a quiet rattle/bearing noise when its under load between 1500-1900rpm, it doesn't seem to do it all time. If anyone has any ideas on what it could be it would be appreciated

thanks
nizute
Hard Yaka
Posts: 174
Joined: Thu Jun 27, 2013 12:25 pm
Location: Maramarua, Waikato

Re: Ford courier 2006 rattle

Post by nizute »

4x4 or 2wd ? in what gear/s?
Rotax
Winch master
Posts: 7
Joined: Sat Nov 02, 2013 9:24 am

Re: Ford courier 2006 rattle

Post by Rotax »

2wd, at first i thought it was pre-iginiton/detonation but since listening to it more it sounds more like a bearing of some sort
nizute
Hard Yaka
Posts: 174
Joined: Thu Jun 27, 2013 12:25 pm
Location: Maramarua, Waikato

Re: Ford courier 2006 rattle

Post by nizute »

Is it in every gear under load? does it make a difference if you put the clutch in??
Rotax
Winch master
Posts: 7
Joined: Sat Nov 02, 2013 9:24 am

Re: Ford courier 2006 rattle

Post by Rotax »

yea i think its in every gear. if i put clutch in it go's away
nizute
Hard Yaka
Posts: 174
Joined: Thu Jun 27, 2013 12:25 pm
Location: Maramarua, Waikato

Re: Ford courier 2006 rattle

Post by nizute »

Ok put the handbrake on and chock the rear wheels and try to drive off put the engine under load(without frying the clutch ) if no rattle i would say front gearbox/ input shaft bearing maybe? Have you checked the gear oil level?
Rotax
Winch master
Posts: 7
Joined: Sat Nov 02, 2013 9:24 am

Re: Ford courier 2006 rattle

Post by Rotax »

ok i will try that now, it has had a new clutch kit by previous owner not long ago tho
Rotax
Winch master
Posts: 7
Joined: Sat Nov 02, 2013 9:24 am

Re: Ford courier 2006 rattle

Post by Rotax »

the noise is not there in neutral, and is not there with hand brake on and wheels chocked trying to drive. It has just had a engine oil gearbox and diff oil change 2 weeks ago
nizute
Hard Yaka
Posts: 174
Joined: Thu Jun 27, 2013 12:25 pm
Location: Maramarua, Waikato

Re: Ford courier 2006 rattle

Post by nizute »

Was the noise there before the oil change?? its hard to know without hearing the noise but i would get a gearbox specialist have a drive.
Rotax
Winch master
Posts: 7
Joined: Sat Nov 02, 2013 9:24 am

Re: Ford courier 2006 rattle

Post by Rotax »

service was done before i got it. It does not seem to do it in 5th gear 3rd and 4th seem to be the worst
User avatar
hamboy
Hard Yaka
Posts: 286
Joined: Sun Aug 12, 2012 10:27 pm
Location: Blenheim

Re: Ford courier 2006 rattle

Post by hamboy »

Keep the revs up above 2000 rpm, turbo diesels don't like being lugged down low. The WLT engine doesn't have much low end torque, but they like to rev and tend drive a bit like a petrol engine.
Rotax
Winch master
Posts: 7
Joined: Sat Nov 02, 2013 9:24 am

Re: Ford courier 2006 rattle

Post by Rotax »

so i have been taking it to a mechanic and he seems to think its a exhaust leak not a bearing
Post Reply

Return to “Tech Section/Library”