91 Terrano LSD rebuild

[tatnz]

I have just re-built my lsd for my 91 terrano useing this methed (take 1)
http://npora.ipbhost.com/index.php?showtopic=29793&st=0#entry565022

I have a sh!t load of parts left over if u need something just ask
(p.s im not nissan and going to charge $100 per plate )
Just keen to help out as i have been in the past





The last photo is of a c200 lsd diff head that im going to do a step by step
on how to put in our r200a front diff(when i get a spear front set up)

[charo249]

Are you sure that you have a C200 diff head in that last photo (as they normally are salisbury style diff with a removeable face plate) that may be a H233 diff

[tatnz]

Yer did some looking and it is a H190 lsd so back on the look out for a c200 lsd head and the link for the rebuild is
http://www.nissanpathfinders.net/forum/topic/29793-lsd-mod-take-2-and-take-3/

[lax2wlg]

This C200 LSD I just located and pulled, this ones spoken for but may have lead on another



The solid axle C200 version is sort of seen as Nissans answer to the Dana 44, similar in terms of dimensions/capacities/applications. Ring gear is actually 7.87"
35s are considered safe and reliable, 37's are considered to be really pushing the envelope w/ this diff.

Realistically strength wise it is somewhere between a Dana 35 and D44, closer to the D44 end.

The H233B strength wise is somewhere between a D44 and a D60 which is a one-ton axle. People have this idea the H233 is unbreakable and its really not, its just a big (albeit well designed) unit for its application.

[charo249]

Not to hard to locate the C200 LSD can be found in the rear of most D21 (89-96) Navara's. Keep those diff parts so you can add a pair of extra clutch plates (they are interchangeable between most C200 and H233 diffs).

[lax2wlg]

Not to hard to locate the C200 LSD can be found in the rear of most D21 (89-96) Navara's.

Only 4x4 Navaras have them, & only as optional equipment. Sometime in the 90s they changed the side gear spline count to 30 (or 31?), its the 29-spline one you want. Also get as old as possible (pre 1990), they skimped on clutch count as the years went by. The clutches are the expensive bit.

The C/R200 clutch LSD is in high demand & road car guys want them for their S14/s13/240sx/300zx, as well as being a popular unit for 510 swaps and custom applications up to 300ish hp.

Keep those diff parts so you can add a pair of extra clutch plates (they are interchangeable between most C200 and H233 diffs).

Correct but not interchangeable with the Y60 Safari rear LSD which have 4-tabs per plate & 33-spline side gears but is otherwise the same unit.

Those directions from MY1PATH are cool and hes a good guy, but way overcomplicated for no reason... its literally a case of splitting it open and adding some more clutches. This has been covered here on ORE, as well as getting one of these LSDs to work in the front of a WD21.

Good writeup from the OP, we need more stuff like this here. Pics, tutorials etc, keep it local... also the JDM trucks have quite a few technical differences to the USDM ones too

[tatnz]

Thanks for the info guys. I have some spear clutch plates if a member wonts them. I have just removed the extra clutch plates as it had turned it into a locker with no give and the wife hated the way it truned at low speed my reply was u have a car so drive that and stay out of the truck then long story short she won so now I need to find a c200 lds to make up for the back being stand lsd

[lax2wlg]

my reply was u have a car so drive that and stay out of the truck

'atta boy.

I'll put the word out for a compatible C200 LSD for ya

Ideally we need a drop in R180 front LSD for you diesel Terrano guys.

From what I have researched, 2005/2006 Subaru WRX STI had a R180 clutch type LSD that some Nissan S-Chassis guys use. Only 05/06, the rest were viscous

[hamboy]

Ideally we need a drop in R180 front LSD for you diesel Terrano guys.

From what I have researched, 2005/2006 Subaru WRX STI had a R180 clutch type LSD that some Nissan S-Chassis guys use. Only 05/06, the rest were viscous

WANT!!!

[slide]

c200 lsd going for a good price. Could be a bargain for somebody?
http://www.trademe.co.nz/motors/car-par ... 255521.htm

[lax2wlg]

Well spotted
I thought 2wd Navaras only had the H190 rear end

Although they used the C200 solid axle in a variety of applications. I saw a full float version at the wreckers from an Atlas dumptruck. That would be a cool rear end upgrade for a D21 Navara; a full float C200 with a super-packed 4-pin LSD.