89661- 60250 ECU wanted / 93 KZJ70 1 KZTE

[KZJ70]

My injector pumps solenoid, i think? isn't working and i'm thinking it's the ECU not opening and closing the spill valve. After a space ECU anyway so i'm going to try swop it out and see if it fixes the problem.

If you have one you're looking to flick or know of a seller?

89661- 60250 & 175800-1924 12V are the numbers i have

Cant find one on trade me unless I'm not looking in the right place of course

Help

[Jerry]

M/T or A/t?

[tallsam66]

You can put a meter across the valve & see ifs it good or not

Should be between 1&2 ohms at 20 degrees celcius...if not its shagged.

[KZJ70]

A/T

I'll check the pump. Thanks for the info. Any way i can check the ECU?

[kbushnz]

Anything Electronic in Nelson can test and repair ECU's . Price is pretty good.
http://www.anythingelectronic.co.nz/aenz/index.php

[tallsam66]

A/T

I'll check the pump. Thanks for the info. Any way i can check the ECU?

You can take the cover off & look for any leaking capacitors ...but not always easy to see if ya don't know what ya looking at...easiest way is to borrow someone elses to try.

[Jerry]

I have a spare A/T ecu you can borrow/use to test whilst you get yours repaired, I had my one in the truck fixed by Anything Electrical and they did a good job.

Wayne @ Wilsons in petone by Pak N Save is really good with these motors)

flick me a txt if you want to borrow the ECU 0274792417
(Edit just sent y a txt )

[KZJ70]

So problem solved. Yip it was the ECU. $150 and Jack in AKL did a full restore by replacing all the caps, a resisitor and a tiny bit of corroded track. 3 day turn around. His current Listing #: 677165651 on Trade Me. His number is 021 0230 5420. Super friendly and informative.

A huge thank you to Jerry for the ECU loan to make sure that was the problem. Thanks mate!