1988 Mitsubishi Delica/L300 4WD van - creaks when turning

For all Mitsubisih related topics

Post Reply
User avatar
rok-the-boat
Stropper
Posts: 3
Joined: Thu Jan 16, 2014 3:29 pm

1988 Mitsubishi Delica/L300 4WD van - creaks when turning

Post by rok-the-boat »

When I turn left, sometimes, maybe 50% of the time, once past half lock I sometimes get a creaking sound, or one large creak/knock.

Went to get it tested at a local suspension shop - it is the three front diff mounts - all loose. What would cause that I wonder? The control arm bushes are all fine. Maybe the previous owner ran it in 4WD?

The price of the parts in NZ is crazy. I am looking at a place called Milners in the UK. It will probably be cheaper with postage.

Also - has anyone done this job? I have a Pajero manual and it looks kind of similar. The shop wants like, $700 to change the bushes. Crazy! And also, I wonder if there are replacement bushes that came in halves - easier to fit etc.
cornflake
Hard Yaka
Posts: 114
Joined: Mon Dec 02, 2013 11:22 pm
Location: marton area

Re: 1988 Mitsubishi Delica/L300 4WD van - creaks when turnin

Post by cornflake »

go to a place called the mount shop should be able to get them cheap i got hole lot of stuff there cheap
User avatar
rok-the-boat
Stropper
Posts: 3
Joined: Thu Jan 16, 2014 3:29 pm

Re: 1988 Mitsubishi Delica/L300 4WD van - creaks when turnin

Post by rok-the-boat »

Hey thanks - haven't seen that place before.
User avatar
rok-the-boat
Stropper
Posts: 3
Joined: Thu Jan 16, 2014 3:29 pm

Re: 1988 Mitsubishi Delica/L300 4WD van - creaks when turnin

Post by rok-the-boat »

Looks like a place in the UK is going to work. Milners. The mount shop didn't have them. A quick question - if the diff mounts are worn a bit, I am guessing it is not unsafe to drive if I don't use 4WD. I mean, without 4WD there are not too many forces acting on the front drive mechanism - am I right? It will take a few weeks before the parts arrive ...
Post Reply

Return to “Mitsubishi”