60 series transfer case wanted

For all Toyota related topics ie. Hilux, Cruiser topics
Post Reply
fyc 4wd
Winch master
Posts: 12
Joined: Wed Dec 23, 2009 2:12 pm

60 series transfer case wanted

Post by fyc 4wd »

Hi I'm looking for a transfer case for my mums 85 60 series, she seems to have done something to low range any help appreciated.
Cheers Aston
micahb
Hard Yaka
Posts: 265
Joined: Thu Feb 10, 2011 5:40 pm
Location: Franklin

Re: 60 series transfer case wanted

Post by micahb »

70 series split cases the same?
If so i have one.
User avatar
Fakey
Hard Yaka
Posts: 1159
Joined: Mon Sep 21, 2009 8:48 pm
Location: Townsville Nth QLD

Re: 60 series transfer case wanted

Post by Fakey »

Only difference is the idler shaft size and manual or vacuum activated 4wd selector, early 60s had 34mm shaft and manual linkages, while the later 60s and 70s had 38mm idler shafts and vac operated 4wd selector. I believe 85 was the changeover year as well.
Didn't barbie drive a jeep??
fyc 4wd
Winch master
Posts: 12
Joined: Wed Dec 23, 2009 2:12 pm

Re: 60 series transfer case wanted

Post by fyc 4wd »

Hi thanks for the reply it's button activated 4wd so dose that make it vacuum? It's hooked up to an H2 if that helps,and I believe it that some 70 series do match up il have to measure the shaft, I'm not very familiar with toyota stuff so appreciate any help
zukmeista
Hard Yaka
Posts: 2380
Joined: Tue Aug 21, 2007 12:00 pm

Re: 60 series transfer case wanted

Post by zukmeista »

Might be worth having a look at the original first to see if you can figure out the problem? If you describe the problem I'm sure someone on here should be able to point you in the right direction.
Hulsty
Stropper
Posts: 5
Joined: Wed Apr 14, 2010 1:26 pm

Re: 60 series transfer case wanted

Post by Hulsty »

Can swap all the cases over as long as you swap the whole case front and rear. Can even swap in a full manual case, just the button wont work anymore and you will need to use the lever.
Post Reply

Return to “Toyota”