1kzte trans cooler

For all topics relating solely to diesel engines and modifications
Post Reply
mike.308
Driver/Navigator
Posts: 31
Joined: Tue Nov 19, 2013 11:22 am

1kzte trans cooler

Post by mike.308 »

Have got a cooler to put in and am just wondering what line is the feed line to the factory one? The one on the left when looking from frount of truck or the right, just want to make sure i put it in before it goes threw radiator cooler
hachi_roku
Hard Yaka
Posts: 281
Joined: Mon Jul 09, 2012 10:49 pm
Location: Hibiscus Coast , Auckland

Re: 1kzte trans cooler

Post by hachi_roku »

its messey, but just run both lines into buckets and start it.. that'll show ya which is the feed
User avatar
klompy
Hard Yaka
Posts: 421
Joined: Sat Feb 28, 2004 12:00 pm
Location: Rotorua

Re: 1kzte trans cooler

Post by klompy »

^^^^ Thats how I do it as well.
User avatar
jonossiksilvia
Hard Yaka
Posts: 727
Joined: Mon Jul 12, 2010 5:53 pm
Location: christchurch

Re: 1kzte trans cooler

Post by jonossiksilvia »

From memory the front outlet from the trans is fluid out
Current 4wd: Surf Kzn185 ssrg factory Intercooled (yet to start build)
Past 4wd: toyota surf ln130, coil sas, 1uz v8 build
_LowKey_
Driver/Navigator
Posts: 44
Joined: Mon Mar 17, 2014 4:37 pm

Re: 1kzte trans cooler

Post by _LowKey_ »

i done some research into this as ive just installed trans cooler, the front (higher pipe) with the sensor plug on the trans seemed to be the out, and the back (lower pipe) seemed to be the return, ive hooked mine up this way and all is working fine.
Post Reply

Return to “Diesel Engines and Modifications”