Hi,
I'm in the process of taking my engine out on my terrano TD27T and RE4R01A.
I have removed the starter motor unbolted all the bolts holding the transmission on, removed the flex plate.
But i still do not have enough room to remove the 4 bolts securing torque converter to drive plate.
I cannot get anything to fit on the bolts.
What has everyone else used to undo these bolts?
Need Help Please
Moderator: Mark
-
travis2ninja
- Hard Yaka
- Posts: 145
- Joined: Sat Mar 23, 2013 2:33 am
- Location: Albany AU
-
Crash bandicoot
- Hard Yaka
- Posts: 2924
- Joined: Thu Dec 30, 2010 7:19 pm
- Location: Towing a hilux
Re: Need Help Please
Use the search function if not try again as i have seen the answer here. it was a ground down ring spanner with a bend in it or something along those lines. haven't had to part that combination only RB to RE4 which is a damn sight easier.
Waiter...there is a drought in my glass.
Re: Need Help Please
i have a ground down socket (both ends) for doing terranos also offset rings spanners work,
The_wehi@hotmail.com
(027 788 1046)
pzj70,35's,Lockers,Winch and some stickers for added flex.
^^Soon to be on safari axles and 5.13's, 37's linked front and rear^^
Ln60 project (money pit) <-- Sold
Pzj77 Turbo/auto,33's .
(027 788 1046)
pzj70,35's,Lockers,Winch and some stickers for added flex.
^^Soon to be on safari axles and 5.13's, 37's linked front and rear^^
Ln60 project (money pit) <-- Sold
Pzj77 Turbo/auto,33's .
-
travis2ninja
- Hard Yaka
- Posts: 145
- Joined: Sat Mar 23, 2013 2:33 am
- Location: Albany AU
Re: Need Help Please
Okay made up a tool and undone the bolts pretty easy.
Putting the new engine in and finding it pretty hard because the rear plate cover is in the way. How do i get the bolts in and tighten them?
Putting the new engine in and finding it pretty hard because the rear plate cover is in the way. How do i get the bolts in and tighten them?