WD21, TD27 EGT & EGR

For all Nissan related topics

Moderator: Mark

Post Reply
User avatar
stovanovich
Hard Yaka
Posts: 286
Joined: Thu Oct 17, 2013 5:54 pm
Location: Auckland, NZ

WD21, TD27 EGT & EGR

Post by stovanovich »

G'day,
Been doing some searching over the forum and there's been some good info on this so far but I wonder if anyone has any new ideas as to the best place to fit an EGT probe & the blocking of the EGR.
Pictures would be great if anyone has any too, Fitting my EGT is the plan for this weekend.

Thanks in advance
Te Rino
'92 Nissan Terrano | Intercooled TD27T | 33 x 10.5s
Build Thread: viewtopic.php?f=18&t=42742
Image
"Hubs In, Caps Off"
Top
User avatar
Crash bandicoot
Hard Yaka
Posts: 2924
Joined: Thu Dec 30, 2010 7:19 pm
Location: Towing a hilux

Re: WD21, TD27 EGT & EGR

Post by Crash bandicoot »

remove the egr and use the flange on the exhaust manifold to fit the egt.
Waiter...there is a drought in my glass.
Top
User avatar
tweake
Hard Yaka
Posts: 2212
Joined: Tue Jan 01, 2008 12:00 pm
Location: start of northland

Re: WD21, TD27 EGT & EGR

Post by tweake »

as above.
just make probe gets into the center of the exhaust runner.
Top
User avatar
stovanovich
Hard Yaka
Posts: 286
Joined: Thu Oct 17, 2013 5:54 pm
Location: Auckland, NZ

Re: WD21, TD27 EGT & EGR

Post by stovanovich »

Great, thanks for all your help guys :mrgreen:
Te Rino
'92 Nissan Terrano | Intercooled TD27T | 33 x 10.5s
Build Thread: viewtopic.php?f=18&t=42742
Image
"Hubs In, Caps Off"
Top
Post Reply

Return to “Nissan”