started to see if the 24v ARB pump will fit were the little 12v pump was, it will with some work, down side ,found broke battery terminal, Repco to the rescue , have a spare terminal now too replaced broken left side mirror dam trees at woodhill
pulled 80 series housing out of front of disco, managed to bend it a while ago, cut all brackets off, rewelded to replacement housing and reassembled the bloody thing, drove around the block, major improvement to steering....
Pulled rear diff head out and replaced couple of broken studs. Put much more goo round the seal this time so hopefully it wont leak and then I wont break studs over-tightening it to stop the leak.
Pulled front drums off my fj40 and stripped down knuckles just gotta clean everything up , what a messy job!! Then wait for all my new bits to arrive to put it back together with the disk brakes I'm getting off Jason (classic cruiser spares) looking forward to having breaks and piecing all the bits on my garage floor back together, need new steel brake line now tho after sharing the end off it I'm bloody good at taking things to bits n breaking them it's the putting back together I struggle with but wel worry bout that next weekend
Shrapa wrote:Achieved didly squat this weekend while back is injured. Did manage to notice rust under rain gutters in the 60 series has come back with avengance!
Mhmm too many options to consider now: A: Panel beater to cut out cancer. B: Find a new roof. C: Cut old roof off and convert to soft top..
Slideways wrote:Made some heavy duty sill protector/side steps for my Safari.
Looks awesome, any chance of pics of your mounting points? Do you have a body lift? hoping to start mine in the next few months.......although I have said that before. I've spent the last few months cutting off my roof and putting a new(er) one on the safari, just finishing up some sanding and painting then onto the bar work.
Ant wrote:Looks awesome, any chance of pics of your mounting points? Do you have a body lift? hoping to start mine in the next few months.......although I have said that before. I've spent the last few months cutting off my roof and putting a new(er) one on the safari, just finishing up some sanding and painting then onto the bar work.
Cheers, yep I'll take some photo's of the mounting points once I've finished welding them. That photo is a test fit with mounts tacked on.
No body lift, I did massage the sill lip inwards (no cutting) to give a bit more room but wasn't strictly necessary. It would be easier with a body lift but I don't plan on it.
Went up to Possum Palace with Andy3542, Lexlux and a few others which I dont think are on here... Had an awesome weekend setting tracks. Big thanks to those who came up and helped us.
great video. Is the LSd working right on the v8 lux?, on the uphill winch piece it didn't seem to be engaging. however it appeared it didn't slow him too much!
Craydiver wrote:great video. Is the LSd working right on the v8 lux?, on the uphill winch piece it didn't seem to be engaging. however it appeared it didn't slow him too much!
He doesn't have an LSD, The air locker is broken so running a temporary open diff. But your right it doesn't slow him down much!