then the bugger moment bent tie rod,
something to do during the coming week,
26 th -27 th July
26 th -27 th July
had a go knock out dent front guards I got a woodhill , reasonable result changed to simexs for farm trip tomorrow ,
then the bugger moment bent tie rod,
something to do during the coming week,
then the bugger moment bent tie rod,
something to do during the coming week,
89 safari, pto winch, 33x15 simexs. sliders,75mm lift . turbo intercoolered
-
stovanovich
- Hard Yaka
- Posts: 286
- Joined: Thu Oct 17, 2013 5:54 pm
- Location: Auckland, NZ
Re: 26 th -27 th July
Finally got around to fitting my idler arm brace (cheers to Tomsoffroad) & recieved my new tyres from the courier. Bring on the Woodhill night run in a couple of weeks 
Te Rino
'92 Nissan Terrano | Intercooled TD27T | 33 x 10.5s
Build Thread: viewtopic.php?f=18&t=42742
"Hubs In, Caps Off"
'92 Nissan Terrano | Intercooled TD27T | 33 x 10.5s
Build Thread: viewtopic.php?f=18&t=42742
"Hubs In, Caps Off"
-
tirantious
- Bush Crasher
- Posts: 69
- Joined: Mon Jan 14, 2013 3:41 pm
- Location: milton
Re: 26 th -27 th July
picked the truck up from the garage after getting its warrent. got a few things to sort out for the next one now 
l200 with not a straight panel on it
Re: 26 th -27 th July
Trying to work on the truck gay as rain! Is holding me up wish list is a garage... painted bars up with some black zinc to protect from rust hope its dryed enough before it got to wet. Was touch dry so should be on only the base coat anyway.
Re: 26 th -27 th July
picked up a surf what a mate brought today
prado front diff and coils keep him busy
prado front diff and coils keep him busy
Re: 26 th -27 th July
^ The idea of a cut down surf is starting to grow on me!
Made up my 3 inch exhuast system on Saturday. All tacked into place, and some of the final welding is done, I just need to sort out a couple more hangers, and do the final welds on the front section, then hit it with some paint and its done. Ill have the $$$ for a downpipe soon, Kaipoi have them for a decent price, so will order soon. Probably means I will need to change the front flange, but that's not a big job.
Made up my 3 inch exhuast system on Saturday. All tacked into place, and some of the final welding is done, I just need to sort out a couple more hangers, and do the final welds on the front section, then hit it with some paint and its done. Ill have the $$$ for a downpipe soon, Kaipoi have them for a decent price, so will order soon. Probably means I will need to change the front flange, but that's not a big job.
Re: 26 th -27 th July
put some ali bullbars on the rano thinking it might need a body lift now 
Re: 26 th -27 th July
tuff lux wrote:picked up a surf what a mate brought today
prado front diff and coils keep him busy
Haha think I know this truck from the person that built it, where in the country has it found its way to this time?
-------------------------------------------------
Newly brought currently bog standard Discovery V8i with a drinking problem
Newly brought currently bog standard Discovery V8i with a drinking problem
Re: 26 th -27 th July
Replaced bottom balljoints in the terrano after failing its WOF. A bigger job than 1st thought. 
Re: 26 th -27 th July
Dropped the engine and trans onto chassis..
Time to sort out exhaust run and winch rope runs...
Also sorted the brake calipers, time to see the laser cutter guys.
Time to sort out exhaust run and winch rope runs...
Also sorted the brake calipers, time to see the laser cutter guys.
Cheers Calvin
KZJ78 Landcruiser Prado...
KZJ78 Landcruiser Prado...
Re: 26 th -27 th July
3VILC wrote:tuff lux wrote:picked up a surf what a mate brought today
prado front diff and coils keep him busy
Haha think I know this truck from the person that built it, where in the country has it found its way to this time?
its in huntly now... ready for more mods