Nissan Injector Pump Question

[ivboost]

Hi all im not sure if I should post here or in the nissan section, anyway

I'm in the process of modifying a QD32eti, I want as little electrics on this setup as possible. So I want to use a TD27T mechanical injector pump (with boost Compensator). I'm fitting a TD04 19T turbo which will supply enough air to support 230hp on a QD32 with afr of 21:1. It is equipped with a large water to air intercooler setup and a hi flow exhaust system. Now Im not saying I want to make 230Hp, i would just like to know how much hp a td27t pump can support before moding that pump and fitting a 12mm plunger and head from a mechanical qd32 pump onto a td27t pump.

thanks

[slidenyo]

Mates runs factory pump an turbo/inlet,
With the pump wound up it eats new standard trucks without getting to hot.
Hot side on the factory turbo sees it run out of puff at 3.5k but an absolute rocket till then.
Best bet is to get it all fitted an running then take it to a diesel tuner, or start fitting gauges to monitor everything