Well since the zuk is not running too well i took to the loom with some cutters and started to wire in a new ecu . Lost the wiring diagram I had when I installed the first one so moved on to other stuff . Decided since the zuk was not going I had better fix the brakes as they were seized ( you strugled to move it in high ratio

) as you could not push it around the garage .
Took 5 hours to get all the pistons out of the caliper

. pump one out , disassemble the caliper , clean up the piston that was out . put it back in reassemble the caliper , block off that piston and do the whole thing again . Grr there is four pistons . Done one side and left the other side for another day .
Moved on to something else that was more fun . Mounting up the super charger to the 1600 suzuki engine . Its a good fit .
Then finsihed off the tow hook mounts for the front of my cousins club truck ( suzuki vitara ) .
Keep finding more work to do before the body can go back on to the chassis

. Still its a new year so have plenty of time .
Cheers
Chris