Nissan VH45 runners wanted.

[Checkerhead]

OK not 4wd parts but hey...

I need the four corner runners that go between the block and the plenum, that the injectors mount into.
They have two different types. Some have about a 30mm odd diameter rubber that mounts the injector. Some use a smaller diameter rubber (maybe 20mm). I need the ones that use the smaller rubber.

So who has some VH45 parts? or knows someone?

Cheers.

Arron.

[Crash bandicoot]

what is the engine serial or if you know what model and year the engine came from or is in?

[Checkerhead]

Good question.
The engine I have will have the wrong runners associated with it. So serial probably wont help.
It's currently sitting in a Safari so that won't help.
They are originally in Nissan Infinity's (Q45) from 1990 to 1996.
I believe that I am after runners from the last few years, but I really do not know for sure.

I will do some research.

[Crash bandicoot]

well we can narrow it down some more the timing chain guide is it plastic/nylon or metal?
Does it have Vairable timing or not
is the alternator top mounted or not?

1990 to 93 had equal length runners and twin circle intake ports

94/95 had oval intake ports and revised injectors.

96 had no VTC

[Checkerhead]

Well you know your stuff. (not the first time you have proved it of course)
Am told it has a metal timing chain guide. But I don't know if that is standard or has been replaced due to the known weakness.
It does have VTC and has/had twin circle equal length runners.

Based on what you have said I guess I need the 94/95 runners. That is assuming the 90-93 runners are interchangeable with the 94/95, except that the injector mounting is different?

[Checkerhead]

Will try to find time on the weekend to pull it apart a bit and get photos of what I need.

Oh forgot, no idea where Alt was originally mounted. (I bought a part done project)

Arron.

[Checkerhead]

Just pulled them off.
Can confirm I need the 94/95 runners with the ovel port.
I currently have the 90/93 siamese runners.
Will try to uplaod pics tonight.
Arron.

[Checkerhead]

Thought I had a lead but it has dead-ended.

Does anyone know anyone who is using/has used VH45 engines that I w=could hit up to see if they have parts?

Any help or leads much appreciated.

[bombaybasher]

I've blown up a couple , got oval and Siamese runners I'm pretty sure I didn't scrap them , they at my brothers place under the hoarding pile , I'll check it out this weekend , keep your eye on this forum , I should have the complete intake manifolds as well

[Checkerhead]

Bro! I would be stoked if you have some!
Will keep an eye on this but flick me a text on 027 278 2556 if you want if you have any.
Cheers.
Arron.

[Checkerhead]

And if you do have them, bring them with you and dream up a price (I'm a poor student now days but am obviously willing to pay)

[bombaybasher]

Will do , be looking on sat

[bombaybasher]

Ok so I found the intake manifolds , heads and blocks but no runners , there is a lot crap to dig through and it looks promising so I'm looking again on sunday

[Checkerhead]

Thanks bro. Fingers crossed.

[bombaybasher]

bad news after an hour or so could only find one runner and its damaged , sorry dude.

[Checkerhead]

Sweet as. Thanks for trying. Much appreciated.