Seized T20 Prado Wheel Bearing Locking Ring Screws

Jerry · Post by **Jerry** » Sat Sep 27, 2014 12:42 pm

If anyone is pulling off their hubs I recommend replacing these pesky screws with NEW ones
One came off ok the other 2 seem to be made of cheese

I'm guessing the only option to get these off now is to drill them out

Toyota P/N is 90149-50055

derk · Post by **derk** » Sat Sep 27, 2014 1:02 pm

did you use the correct size torx bit or jam a screwdriver into them

Jerry · Post by **Jerry** » Sat Sep 27, 2014 1:07 pm

This was with the torx bit

kbushnz · Post by **kbushnz** » Sat Sep 27, 2014 1:19 pm

I replaced mine with cross head style screws instead of the torq ones....

oldblue · Post by **oldblue** » Sat Sep 27, 2014 2:09 pm

Bit late now, You should punch the head of the screw with a flat faced punch before unscrewing them and replace with CSK Allan machine screws.