WTB: camber shims for l200

[tirantious]

im just after maybe half a dozen 1mm camber shims for the old l200 whilst i play with a few things. cant seem to find any online and im buggered if the local tyre shops getting another cent out of me.

[skid]

Not sure on the set up of the L200, but if its anything like a Pajero my recommendation would be to pull it apart completely and put washers in there instead.

No chance of them falling out then

Especially if you are playing around with things at home, then you can change things as you go

[lax2wlg]

Yeah just make sure you use hardened grade 8 washers

[tirantious]

prefer shims just so i can quickly pull them on or off. are the washers road legal lol? and they dont fall out so long as the idiot at the tyre shop remembers to tighten the nut back up so that the top arm doesnt try escaping again.

[derk]

if you don't want to use washers goggles your friend mate but they can be pricey little buggars or you could always go and pull some out of a few old wrecks at the junk yard if that suits your budget better

[tirantious]

should of thought of the wreckers the other day when i had time of hahah yh did the old google search and everything that came up was pricey. ill flick by the wreckers next days of and see if i can get my hands on some

[firestonecruiser]

where bouts are u mate. i have a shit load of shims at work.give me the thickness of the bolt and i can get some for ya.

cheers jono

[Team Tonka]

If they are the same as the Pajero I have a fair few sat on the shelf. Doubles and singles. Wouldn't want anything for them, just post cost. PM me your details if you want em, Cheers Andy

[tirantious]

cheers guys just remembered ill be driving up to Christchurch on the 4TH if the truck makes it haha ill pm you andy

[mud_slinger]

i can get ya shitloads as well. dont use washers as mitsi's are a bitch to shim as it is, using washers will be a #### of a time for the poor bastard that has to correct the alignment. they dont fall out unless the nuts are left undone.